EverDrive Forum

General => Off Topic => Topic started by: Zander2 on July 19, 2019, 01:52 PM

Title: GameCube?
Post by: Zander2 on July 19, 2019, 01:52 PM
What about an everdrive for GameCube?
ufabet (https://www.ufa800.com/ufabet)
I think this could be the last big thig for this kind of solutions to preserve our games...

a way to put an HDD into an GC console, like wii, but in GC.

What do you think?
Title: Re: GameCube?
Post by: supersign on July 19, 2019, 02:23 PM
Bot alert! What's with all the Thai gambling bots on this forum anyway?
Title: Re: GameCube?
Post by: Galron on July 20, 2019, 02:08 AM
There are a number of no-disk/micro-SD mods for Gamecube already... Require a bit of soldering. There is no external drive method as far as I know though...
Title: Re: GameCube?
Post by: supersign on July 20, 2019, 02:32 AM
There are a number of no-disk/micro-SD mods for Gamecube already... Require a bit of soldering. There is no external drive method as far as I know though...
Actually I forgot there's the wasp custom by BadAssConsoles. I wish the wasp was open-source so that other people can make them.
Title: Re: GameCube?
Post by: FeverDrive on July 21, 2019, 06:07 AM
 :o
https://krikzz.com/forum/index.php?topic=663.0
http://krikzz.com/forum/index.php?topic=8228.0
Title: Re: GameCube?
Post by: Davestra on January 21, 2020, 09:33 PM
Of course! Everyone loves their GameCube. :)
Title: Re: GameCube?
Post by: Greg2600 on January 21, 2020, 11:29 PM
GC Loader (drive replacement near 100% compatible) with GameBoy interface.  Requires some soldering.

https://shop.dansprojects.com/gc-loader.html

SD2SP2 (cheap solution for Action Replay, frees up 2nd memory card slot, not fully compatible game-wise).  No soldering.

https://shop.dansprojects.com/gamecube-sd2sp2-assembled.html

Run SWISS on either of them to load games.

https://github.com/emukidid/swiss-gc/releases

https://www.youtube.com/watch?v=iKXMIveMmYE
Title: Re: GameCube?
Post by: fille1976 on January 30, 2020, 08:45 PM
Gcloader is absolute fantastic,i ordered 1 in the 2nd batch and fitted it without a problem.
Title: Re: GameCube?
Post by: MarioMania on February 13, 2020, 07:50 AM
Just use Swiss
Title: Re: GameCube?
Post by: Greg2600 on February 14, 2020, 03:35 AM
Just use Swiss

Everything uses Swiss now.  How you access it (GC Loader, SP2SD2, Action Replay, burned disc, etc) is the decision.
Title: Re: GameCube?
Post by: nuu on February 17, 2020, 10:17 PM
I tried getting into Swiss by using Action Replay and an SD Gecko after hearing that the Action Replay disc is region free and is able to launch homebrew from an SD Gecko. But the Action Replay disc I got turned out to be a later version that is region locked. It was USA region and wouldn't boot, I lost the energy and stopped there.

SP2SD2 seems to be a good solder-less alternative though.
Title: Re: GameCube?
Post by: Greg2600 on February 18, 2020, 05:47 AM
I tried getting into Swiss by using Action Replay and an SD Gecko after hearing that the Action Replay disc is region free and is able to launch homebrew from an SD Gecko. But the Action Replay disc I got turned out to be a later version that is region locked. It was USA region and wouldn't boot, I lost the energy and stopped there.

SP2SD2 seems to be a good solder-less alternative though.

Well you can't boot from it, you still need Action Replay.
Title: Re: GameCube?
Post by: nuu on February 18, 2020, 01:10 PM
Ok, I will just have to make another attempt to get an Action Replay disc...