Messages

1

FXPAK (SD2SNES) / Re: Super Game Boy 2 (Beta)

« on: October 02, 2020, 02:23 AM »

SGB Firmware Merged into the Savestate firmware a while back and now it looks like that firmware has been merged into official including SGB. Maybe we will get a new release from Ikari soon?

2

FXPAK (SD2SNES) / Re: Super Game Boy 2 (Beta)

« on: August 18, 2020, 02:41 AM »

They released SGB07

Fixed another save state hang by added IME state to dbg src.
Fixed PBD hang by pushing off H-Blank another bus clock.
Added better MBC1M detection.
Added support for SGB1 frequency.
Fixed row buffer read/write conflict at SGB1 frequency.
Fixed partially flashing scanline by giving SNES early notification of a scanline and row buffer completing.
Removed checks for disabling in-game hooks and associated override cfg option. User responsible for setting enable/disable correctly and running with functioning boot and bios file.
This is the final version unless major bugs are found and there is time to fix them.

https://github.com/redacted173/sd2snes/releases

3

FXPAK (SD2SNES) / Re: Super Game Boy 2 (Beta)

« on: July 26, 2020, 07:01 AM »

SGB06 released about 15min ago.
https://github.com/redacted173/sd2snes/releases

Fixed MBC2 register write bug.
Fixed several games hanging on save state due to serial state machine not going idle.
Fixed another hang on save state issue with ICD2 idle.
Fixed joypad data bus bug when both lines asserted.
Added a few (partially implemented) mappers. See readme.txt.
Added back brightness patch with MSU on classic.
Fixed save state audio regression by always allowing dbg src to read/write wave RAM.

4

Master EverDrive / Master Everdrive Power Requirements?

« on: July 22, 2020, 06:05 AM »

Hello I recently obtained a Sega Master System though it was missing some cables, so I used a Universal AC Adapter rated at a max of 800mA which seems to work fine for the games I have however the specs say it should have a 850mA adapter. I understand that Flashcarts can draw a bit more power, so I was wondering will a Master Everdrive work with the current power supply or do I need to find a proper replacement?