Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - BRNexus

Pages: [1] 2 3
1
Turbo EverDrive / Re: Newer Doujindance mods seem fine
« on: September 30, 2018, 11:24 PM »
We know its you Doujindance.   8)

2
Joyzz / Issues with controller not responsing/lagging.
« on: August 25, 2018, 10:03 PM »
I've had this controller for about 2 months now and just randomly it started acting weird.  Button presses don't register all the time now.  Is it just low on battery? 

Again, didn't experience any issues until today. 

Update: 

I believe it was low battery.  I just tried it while plugged via USB cable to my computer and its working fine again.   Hard to tell when battery is low since there is no light indicator.

3
News / Re: Joyzz Availalbe for order!
« on: July 22, 2018, 03:24 AM »
Has anyone else noticed that you can completely press in the dpad on joyzz? As in, you can press the center and activate all four directions of the dpad at once? Most controllers "rock" from one side to another.

Is this common on OEM genesis controllers?

I have both Joyzz and OEM 6 button controller.  You cannot activate all 4 pads at once on either controller.

4
Joyzz / Re: Future Wireless Controllers?
« on: July 21, 2018, 03:00 AM »
At the moment i have plans to make snes and nes controllers

Please do a NES controller with the SNES Y/B layout.   

5
Joyzz / Re: Future Wireless Controllers?
« on: July 21, 2018, 02:59 AM »
AVS wireless controller pairs excellent,

Which AVS controller do you have?

The wireless controller.  Its completely microswitched.  Don't really like that.

6
Joyzz / Re: Future Wireless Controllers?
« on: July 20, 2018, 01:49 PM »
He said he is developing new controllers.

7
I just say implement the SA1 features that supports the most popular SA-1 games.  Basically the games you already have running.   If you can also support other games as well, cool, but I think people will just be happy with Super Mario RPG and the Kirby games working.

8
News / Re: Joyzz Availalbe for order!
« on: July 15, 2018, 12:42 AM »
It only partly works with the AtGames Genesis Flashback HD.  It seems to work great at first, but the directions get stuck in game.  So, it ends up holding left or right, etc.  This seems to correct itself after certain button combinations.  I don't blame the controller for this though... more likely an issue with the emulator (or possibly a conflict with the already wireless function of the console itself).

I have had the same problem on a real genesis (read a few posts up). Hopefully it's not an ongoing issue...

Wait, I thought 2600 doesn't have a active 5V line on the controller port. 

9
News / Re: Joyzz Availalbe for order!
« on: July 15, 2018, 12:39 AM »
Krikzz,  you make a NES or SNES wireless controller and I'll be there day one.   Really happy with my Joyzz with the exception of the faded logos. 

10
News / Re: Joyzz Availalbe for order!
« on: July 09, 2018, 01:40 AM »
Note the LED described is on the receiver, not the controller.

Ah, thanks!

Krikzz, is there any way you can do another button option for two button 7800 games?    To get two button 7800 games to work on an original Genesis controller you have to rewire the Genesis cables, but perhaps with Joyzz you can achieve this via software.

I use a Genesis-to-7800 adapter that I made years ago and it works great.  (I just added that note to my earlier post to avoid confusion).  This adapter also works with the Colecovision, since the Coleco uses the same 2nd button wiring/resistor as the 7800.  Although a software solution would be great also.

Well there is this adapter for $25 I might pick up. 

https://edladdin.com/Seagull-78-Controller-Adapter-ec-2-001.htm

11
News / Re: Joyzz Availalbe for order!
« on: July 08, 2018, 10:53 PM »
Krikzz, is there any way you can do another button option for two button 7800 games?    To get two button 7800 games to work on an original Genesis controller you have to rewire the Genesis cables, but perhaps with Joyzz you can achieve this via software.

12
News / Re: Joyzz Availalbe for order!
« on: July 08, 2018, 03:08 AM »
Received my Joyzz controller.   It works great and feels great.   

Though, I have some minor complaints that I think Krikzz should consider looking into. 

- Weird sticky residue on the bottom edges of controller.  Came off with rubbing alcohol, but kinda weird it was there.

- Krikzz and Start button logo finish is too weak.  You can easily rub them off with your thumb. 

Hopefully, these things can get sorted out down the road.  At $65 + Shipping there should be no issues like that.   

13
EverDrive N8 / Re: Why only ugly yellow shell?
« on: July 07, 2018, 12:52 PM »
Sure, there were yellow carts, but if you are going to have one cart installed in your system 24/7 then why not a more standard color like Black or even White?

14
EverDrive N8 / Why only ugly yellow shell?
« on: July 07, 2018, 07:13 AM »
I mean out of all the colors one can choose, why yellow?   It doesn't match any of the Nintendo consoles.  I mean Black or White would be a better standard color. 

15
All VGM files below 4MBs work just fine and all 4MB games will run, but for some reason 4MB VGM files always give me an "Unsupported Game" Error.

Pages: [1] 2 3