Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - fille1976

Pages: [1] 2 3 ... 23
1
EverDrive N8 / Re: N8 Pro cartridge shell thickness
« on: January 01, 2020, 11:24 PM »
I have noticed that the N8 Pro cartridge, when inserted in the AV Famicom cartridge slot, can wobble quite a bit, unlike the original N8.  It appears the N8 Pro cartridge shell is thinner than the original by about 1mm.  See the attached pictures.  I was able to make the game reset by just moving the N8 Pro cartridge around.

Krikzz, would you consider increase the thickness of the N8 Pro Shell by a 1-1.5mm?  It would be a lot more stable, given the increased height of the N8 Pro.  As it stands right now there quite a bit of play in between the cartridge slot walls and the cartridge itself.

Why you want to wobble a cartrigde that is in the slot is for me a mystery,if it works,why wobble the cartrigde,explain that please,its like my neosd pro has loaded a rom,and ok,i going to test if its reset if i wobble the cartridge where those are not for made at first.
Those are made for insert them and play  the game,and thats it.

2
EverDrive N8 / N8 v1.20 official is out
« on: January 01, 2020, 09:34 PM »
Hi,

v1.20 is released with new mappers and fixes.

nesos-v1.20 23.12.2019
1) OS naming convention was changed to make clear differentiation between PRO and OG N8 OS. OG N8 OS is 1.xx and PRO is 2.xx
2) Now save states supported by all mappers.
3) New fully functional MMC5 mapper
4) New FDS audio core
5) Audio core for Sunsof5 mapper by Necronomfive
6) Audio core for VRC7 mapper by Necronomfive
7) Specific games databese update. Now works few more games which require specific settings
8) Minor update from MMC3
9) New mappers support(1):  27, 30, 50, 106, 108, 142, 144, 145, 149, 156, 165, 171, 175, 176, 183, 213, 216,
9) New mappers support(2):  222, 252, 37, 45, 49, 51, 52, 105, 177, 190, 197, 207, 214, 228, 229, 244, 249, 250,
9) New mappers support(3):  35, 44, 56, 60, 103, 117, 132, 136, 143, 159, 172, 173, 183, 186, 187, 198, 199, 221, 238, 248
10) FDS autoswap blocking function. Hold A to prevent disk swap. This is mostly for test fds sound in zelda intro.
11) Fixed irq counter in Acclaim mmc3 mapper
12) Audio balance option for mappers with expansion audio
13) Some mappers and fixes were back ported from N8-PRO

3
Master EverDrive / Re: New X7 OS v1.03
« on: December 19, 2019, 10:33 PM »
Tested with my x7,not working.

4
EverDrive 64 / Re: Need original ED64 v1.01 files for SD card
« on: November 14, 2019, 12:00 PM »
http://krikzz.com/pub/support/everdrive-64/v2x-v3x/os-bin/

I think it is v1.29,try it and report here back if that worked.

5
News / Os 3.09 mega everdrive x7
« on: November 01, 2019, 01:11 PM »
New 3.09 os for mega everdrive x7:eeprom fix for megaman(u)

6
Off Topic / Re: 3DO Russian usb ode questions.
« on: September 14, 2019, 06:33 PM »
This i gona install to the fz-10.
Then once the fz-1 rgb board is available,order and install that and probably gona order a usb for the fz-1.
Got a problem with the tray with fz-1,but new belt fixed the problem.
Fz-10 is recapped and rgb modded,so just have to install the usb board.
Gona recap my fz-1 if necessary,then rgb mod it and install the usb board.
But got so many new things(jag sd-tf330-mega sd-controllers retro bit for megadrive-saturn-n64-xbox 360 slim rgh).
So i have to take a break now.

7
Off Topic / Re: 3DO Russian usb ode questions.
« on: September 08, 2019, 02:19 PM »
Ordered 1 and a panasonic 3do FZ-10 rgb modded.
Once Taijigamer new board is out i gona install it in my FZ1.

8
Off Topic / Re: Terraonion Mega CD FPGA Cartridge
« on: September 08, 2019, 02:13 PM »
Its a really good product,it plays absolutly perfekt,here and there small issues thats get fixed by neodev.
I think the price is fine,find a pristine mega cd,much have problems-needs recap or cd drive belt-laser ect...
My mega cd is fine,but for how long???,so glad TO made this.

9
Off Topic / Re: Terraonion Mega CD FPGA Cartridge
« on: August 07, 2019, 01:39 PM »
Yep,me too,i'm in belgium,this is a real bummer cause its not on the website while i ordered,it whas taxfree.
But they moved to andorra,and thats europe,but not EU,so in EU we must pay fees,in the us you don't have to pay fees under 800$.
Why i born in europe and not in the us,for electronics this europe is big shit.

10
EverDrive GB / Re: Old EDGB stopped working
« on: July 19, 2019, 11:39 PM »
Try to contact krikzz.

11
Off Topic / Re: New Mega Everdrive X7 revision!!
« on: June 26, 2019, 09:02 PM »
I still own rev1 ssds3 and did the audio mod on it,it works fine,many problems are related with modern tvs and people using crap cables ect...
I use packapunch pro cable with core grafx and rev1 ssds3 and have no problems with it on lg led tv with ossc.

12
Off Topic / Re: Terraonion Mega CD FPGA Cartridge
« on: June 18, 2019, 07:09 PM »
Ordered mine yesterday,can't wait to have it,next month i'm gona order a neo sd pro.

13
EverDrive 64 / Re: ED64 Plus Problem
« on: May 25, 2019, 08:54 AM »
Here is support only for OFFICIAL everdrives,no clones,srry.

14
@fille1976

We are discussing this on Discord with ikari.
Yes, SA-1 and SuperFX games have issues with 1.10.2 release, graphical glitches and freezes.

Normal, Pro or both, which one the issue?

I respond to myself (from https://sd2snes.de/blog/archives/1063#comment-991870 )
"Just to let people know, there’s a bug in this release which affect chip games, mainly in sd2snes non pro.
Ikari is already working on a fix and recommend people to stick to 1.10.1, for now."
Srry Phoenix,but i readed it on the discord,but whas busy with my new mainboard and cpu.

15
Ah,ok then,i thought the problem was here.

Pages: [1] 2 3 ... 23