Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - yojc

Pages: [1] 2
News / Re: EDN8 OS v20-BETA. Large update incoming
« on: May 28, 2020, 11:26 AM »
The V2.07 release of the EDN8 Pro OS introduced a following fix:
2) Fixed stuck at the end of level 4-4 in SMB2
Will this fix be introduced for the regular EDN8 too?

News / Re: EverDrive N8 PRO has been released!
« on: February 28, 2020, 07:26 AM »
How i can ask, Where i can buy Everdrive N8 pro with Sendship to Poland?
You might try, I've ordered some of mine Everdrives (not the N8 Pro though... yet) from them and they did a good job. IIRC items are shipped from the USA, but the shipping cost is very reasonable ($6) and I had to pay no extra taxes or import dutes (your mileage may vary).

Shop and Shipping / Re: Does ship to Poland?
« on: November 26, 2019, 12:51 PM »
That's what I was worried about. Bummer :(

Shop and Shipping / Does ship to Poland?
« on: November 25, 2019, 08:27 AM »
On the checkout page Poland doesn't seem to be available in the countries list, is that an error or this store doesn't ship to Poland?


I'm using an Everdrive N8 with v20 RC7 OS on an unmodded AV Famicom. There is one game from the Famicom Disk System that I can't get to work - Transformers: The Headmasters.

As the game boots up, it stays on the title screen for a brief moment, and then comes up with the error screen "Disk Set Err.01". Delaying the disk swap doesn't do much.

Video in action just to demonstrate the issue:

Can any of you confirm if this happens not just for me? And maybe suggest a possible fix? Thanks in advance!
I know the game sucks, but I'm intrigued nonetheless :P

News / Re: EDN8 OS v20-BETA. Large update incoming
« on: April 07, 2019, 12:18 PM »
Out of curiosity what version of v20 was that running ?

News / Re: EDN8 OS v20-BETA. Large update incoming
« on: April 06, 2019, 11:51 AM »
Try Mega man 3 and 4. 3 randomly freezes and 4 has graphical issues like with the hippo in ring man's stage.
I've got a physical copy of Rockman 4, so I've compared it against Mega Man 4 ran on EDN8 via the adapter.

Ring Man stage in Rockman 4 (real cartridge, AV Famicom):

Ring Man stage in Mega Man 4 (EDN8 v20 + adapter, PAL NES):

Looks alright to me :) (and before you ask, it works the same with the EDN8 on AV Famicom and US/JP ROM)

I've played around with the adapter I've received, and my worries were completely ungrounded. There is a lot of room to spare with the adapter, there's no issue with pushing the cart down. Although I have one pirate Famicom multicart which is too thick to fit the console for some reason.

But don't be as dumb as me and don't order this design, because Famicom carts won't fit with their cases on... you'd need to open them up and insert bare PCBs:

It's pretty obvious by just looking at it, but this only occured to me after I've tested it...

Thankfully dremel sorted that out. :P

News / Re: EDN8 OS v20-BETA. Large update incoming
« on: March 31, 2019, 06:13 PM »
That is strange. I've just received some cheap-ass 60 to 72 pin adapter from China, and my Everdrive N8 works on my AV Famicom, and NES frontloader (PAL) consoles with V20 firmware. I haven't spotted any issues so far.

EverDrive N8 / Re: Smurfs and Asterix E not Working
« on: March 23, 2019, 12:29 PM »
Asterix will definitely not work correctly on NTSC systems. I think there was a patch that solved this issue, but I'm not sure.

As for the Smurfs, from what I recall they were more or less playable on an emulator in NTSC mode (with occasional glitches). I was able to get the game running on my AV Famicom, the first level seemed to play fine.

Thanks for your input :)

I've ordered this adapter, we'll see how it fares.

Yeah, I know about that one, but it's too expensive for something that I'm only gonna use rarely. Plus, it's definitely much bigger - I have serious doubts that it'll fit with the cartridge pushed down.


I'm a very happy owner of the EDN8. I play the games mainly on my AV Famicom, but I've recently acquired a PAL NES. Now I'm wondering if there are any Famicom to NES cart adapters that will fit, ie. I want to be able to use my EDN8 on NES and be able to push down the cartridge.

I'll be honest, I want to do this as cheaply as possible. All I want is to play some of the PAL exclusives (Noah's Ark, Smurfs, Asterix, etc.) - so the non-working sound expansion chips, problems with MMC3/5 (if I'm not mistaken, some of the adapters handle it quite badly) are of no issue to me. As long as most of the games work, I'll be happy.

Now... from what I see, the EDN8 is a little bit taller than a standard Famicom cart, and that can be a bit problematic.

Would this adapter be okay for my needs? It looks reasonably compact, but I'm not sure if I'll be able to push down the cartridge.

And yes, most of the PAL games work on the NTSC console (Asterix is one of the exceptions), but I want to be able to play them at the correct speed.

Any help would be appreciated. Thanks!

« on: February 03, 2019, 07:34 PM »
I wonder if it would be possible (on paper at least) for the SD2SNES Pro to play Game Boy Color games... now THAT would be a big reason to upgrade.

Shop and Shipping / Re: Black Friday 2018
« on: November 22, 2018, 04:59 PM »
Does anyone know if the Retrogate store will have a similar Black Friday discount this year?

Pages: [1] 2