Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - MaarioS

Pages: 1 2 [3] 4
EverDrive 64 / Cannot get Everdrive 64 v2 to boot
« on: September 12, 2015, 10:31 PM »
I've been using Everdrive 64 (ver.2) for about 1-2 years and it was working fine when I used it on PAL console (so ED64 had PAL CIC). After that I got an NTSC console so I soldered in NTSC CIC into ED64 (NUS-6102). Now all I get is "file not found" error and it asks me to put OS to SD card. Even though I put the newest OS on the cart (ED64 folder into root) and still doesn't work..... I didn't call cards "ED64" either. Tried about 5 SD cards and formatted them multiple times and still no effect, still bootloader doesn't find OS files......

Any suggestions?? Many thanks in advance!!

Is the 27C040 just a simple swap or is there some rewiring involved? I'm expecting my new EPROM programmer to arrive soon so this is good timing.

No rewiring involved, just simply replace the mask rom with a new 27C040 and there you go

Wow, well done! May need to do that to a cart myself...

EDIT : There seems to be a bit of graphical corruption on your file load screen, is that normal? Nestopia doesn't seem to have that on my end

I have already explained that: Ignore the garbage text in the name fields, that's because my older save data was already there and it caused it to garble. Other than that everything looks and works perfectly fine

I finally made my cart yesterday and yes, it works!! :D

Ignore the garbage text in the name fields, that's because my older save data was already there and it caused it to garble. Other than that everything looks and works perfectly fine

EverDrive N8 / Re: Games with possible issues
« on: July 20, 2014, 09:33 PM »
Are you sure everything is right with your hardware?? I checked all the games you mentioned and they appear to be working with absolutely no issues on my Famicom AV and ED N8 (FC edition)

EverDrive 64 / NTSC games on PAL-high pitch sound??
« on: March 28, 2014, 12:02 AM »
Hey there, I've received my Everdrive 64 today and I'm so happy about it ;) . But I've come across 1 issue- since I live in Europe (Poland) I play on a PAL console with PAL Everdrive 64. When I play PAL games on it, everything works like a charm but when I play NTSC games, the sound is pretty strange. EVen though the games work also perfectly fine with no problems, the sound is a little high-pitched, to describe it easier "it sounds too happy than it supposed to be". Does anyone else have the same problem?? Is it fixable?? My Nintendo 64 is the newer revision, clear black to be exact. Please for some suggestions. Thanks in advance!!

EverDrive 64 / ED64 out of stock??
« on: March 12, 2014, 12:11 PM »
Maybe it's not that appropriate to begin a new topic like that here but anyways- when will Everdrives 64 be in stock again?? I'd like to buy exactly 10 of them but there's only 1 right now. Can't wait to buy and finally use them ;)

EverDrive 64 / Re: SNES Support
« on: March 12, 2014, 12:08 PM »
Think it cant run some games like Firefox

I'd really wanna play THAT game ;D

EverDrive N8 / Re: EverDrive N8 - Blue screen not OS loading
« on: January 26, 2014, 07:51 PM »
Maybe the BIOS got corrupted?? Any ideas how to repair/update BIOS if the cartridge isn't 100% working??

EverDrive N8 / Little correction-nesos v.8
« on: November 22, 2013, 11:51 PM »
I found out there's something wrong with the file. I mean, there's nothing wrong with the files but they should be stored in EDFC folder. Some new users may be confused that the soft doesn't work since the files should be located in that folder, a little error but still

EverDrive N8 / Re: EverDrive-N8 NES cic configuration (MUST see!)
« on: September 27, 2013, 03:23 PM »
It should work problemless since clones don't have any security chip at all. At least I've never heard of a clone that has a lockout chip...

EverDrive N8 / Differences between USB and no-USB versions
« on: September 25, 2013, 05:25 PM »
I always wondered what the exact differences are between these 2?? What can the USB version do what no-USB version can't do?? Is USB ED useful for programmers only?? What about update features like software or BIOS update?? Are they still available for no-USB version?? Detailed replies will be so appreciated!!

EverDrive N8 / Glitches in games on EverDrive N8-general
« on: September 22, 2013, 09:01 PM »
I'm kinda surprised there hasn't been any topic like that so far, so that's why I want to start it. As the topic says, write here about the problems/glitches in games you came across while playing them on ED N8. But you need to be 100% sure that this is the problem with ED itself, not with your console nor the rom!! So here we go:

1.Many Camerica games (Fantastic Adventures of Dizzy, Micro Machines, Ultimate Stuntman etc.): many of these games show glitched graphics like there are some mirroring problems and some of them just crash/freeze at random moments. Fortunately, when you change mapper to mapper 2 in headers, most of the games work just perfectly fine but still, there's some problem with mapper 71 (Camerica) implemented

2.Minna no Nakayoshi Daisakusen: doesn't work at all, all it shows is a gray screen (tested on 3-5 consoles, the same effect)

3.Wai Wai World: there appears to be some more mirroring issues but only in the Twin Bee/Gradius level near the end of the game. You can see it in the demo of the game

@Krikzz: would you please make this topic sticky?? I guess this would make things much more convenient if everybody reports any bugs here so all the issues will be kept in one place. Thanks in advance!!

EverDrive N8 / Re: Final Fantasy Sprite Glitch - Everdrive N8 OS v7
« on: September 19, 2013, 08:40 PM »
You mean the same glitchy effect as shown in the 1st post?? I have ED N8 Famicom ver with OS v7 and have no glitchy graphics whatsoever, the photo must show some problem with the console or the rom itself

I have ED N8 Famicom ver. and if I plug it in into my FC Mobile 2 (NTSC ver.) through the converter, it gives me SD initialization error screen, but if I plug in the AC adapter to the console, it just works perfectly fine. Well it depends so much on what batteries you're using for the console so there can be the problem right here. Did you try plugging the AC adapter anyways??

Pages: 1 2 [3] 4