SD2SNES REVISION G ???

[claudiosperes]

Hello everybody, I wonder about the Revision G ?? what's different?

[rafaelalvesals]

maybe just a mistake when update the date of the batch, the letter F and G are side by side on the keyboard and remember, ikari said that F was the last one, so no more hardware updates and if you look at the board of Rev F and Rev G, its exacly the same.

[OneBagTravel]

The picture didn't load for me for some reason. In case others were having the problem:

http://i.imgur.com/m90vO4U.jpg

Krikzz care to comment??

[claudiosperes]

The picture didn't load for me for some reason. In case others were having the problem:

http://i.imgur.com/m90vO4U.jpg

Krikzz care to comment??

I could fix the image with your link, thank you ... I think change a letter of review by typo would be very strange kkkkk

[loxbus]

Thats a good question.

It's not a typo as previously mentioned, as it says G 2015.
Where-as revision F says 2014.

Krikzz ?

[dvd2vcd]

I also wanna know whats new with rev G..

[ikari_01]

The difference from Rev.F is that the DAC runs at 5V to improve on the MSU1 volume issue. See also http://forums.nesdev.com/viewtopic.php?p=155367#p155367
Rev.G is otherwise identical in capabilities and compatibility as no core hardware has been altered.

[claudiosperes]

Thanks IKARI 

[Link83]

The difference from Rev.F is that the DAC runs at 5V to improve on the MSU1 volume issue. See also http://forums.nesdev.com/viewtopic.php?p=155367#p155367
Rev.G is otherwise identical in capabilities and compatibility as no core hardware has been altered.

Thanks for the info ikari_01 Is it possible to mod an earlier revision to feed 5V to the DAC? (Like the earlier mod for E1/E2 revisions to improve picture quality on 1CHIP consoles)

[ikari_01]

Yeah, you could remove FB341 and run a wire from a 5V spot to the LEFT pad of the vacant footprint.

[MockyLock]

So this mod is also for rev.F, right ?
Could you post some pics/how to for the mod please ?

[D4v3WTF]

I've done the mod on my rev. F. Here are some pictures.











Greetings

[dreimer]

Wasn't C391 one of two parts added in last rev? Can't check @work... OK, so I jump another rev today as it seems

EDIT: Yeah it was. Nvm ^^

[D4v3WTF]

Wasn't C391 one of two parts added in last rev? Can't check @work... OK, so I jump another rev today as it seems

I think it was C391 on the back and L391 on the front.

[dreimer]

Correct. OK, will try that @ home. Did you notice any difference?