SD2SNES June 2016 re-stock PCB revision?

[SmokeMonster]

Impressive, Borti. Nice!   

[zeruel85]

How could I missed that out? 

Thanks for sharing Can't wait to test that out...



If this ^ PCB fits, I will share the design (as usual)

I was doing it for me and my friends, then I saw your post... You're pretty fast, lol. 

[borti4938]

Looks really nice! Do you have any news if it fits?

Thanks I've ordered my PCB last week from OSHPark - so it will need maybe one month for me to give a final statement. Nevertheless, the printout fits well; if the PCB also fits I will put the OSHPark project status to public.

[DhinCardoso]

Wow! What this mean, a pre-assembled PCB to do the upgrade from Rev. F to H? Sorry the newbie question, but how this works? This eliminate the need of all the soldering to just one or two? I definitively need to learn the basics of analog eletronics =/

[borti4938]

The board is designed in such a way that you have to remove the SMD components (see this picture) and place the PCB directly on the the freed pads. Last step will be then to solder the Rev.H ID wire (see here).

The PCB was shipped last week - can't wait to test it

[borti4938]

 

[zeruel85]

Ahhh, so nice!

[RetroRGB]

Wow, that looks great!  I'll definitely be using that method to upgrade my SD2SNES.  Excellent work!

[borti4938]

Thanks
PCB can be ordered on OSHPark for just $1.35 (three PCBs). Please use thickness of 0.8mm
https://oshpark.com/shared_projects/1ej3Nrdj

[SmokeMonster]

Incredible work, Borti. Thanks for designing this and releasing it for us

[fille1976]

received the board borti,thx.

[Sylver]

Thanks borti4938 for your work !
Could C1 be retrieve from one of the caps to remove (like C347/C348 for example), or there are no capacitor with the right value and do I have to order a 0.1uF capacitor ?
Edit : I got a 0.1uF capacitor so I don't need the answer but if anyone can answer, it could be useful for some other people

[RetroRGB]

Can someone please confirm the BOM for Borti's board?:

1x:  https://www.digikey.com/product-detail/en/stmicroelectronics/TS922AIPT/497-8137-1-ND/1883776

1x:  https://www.digikey.com/product-detail/en/kemet/C0603C104J4RACTU/399-1097-1-ND/411372

2x:  https://www.digikey.com/product-detail/en/panasonic-electronic-components/ERJ-3EKF10R0V/P10.0HCT-ND/198100

[zeruel85]

Can someone please confirm the BOM for Borti's board?:

1x:  https://www.digikey.com/product-detail/en/stmicroelectronics/TS922AIPT/497-8137-1-ND/1883776

1x:  https://www.digikey.com/product-detail/en/kemet/C0603C104J4RACTU/399-1097-1-ND/411372

2x:  https://www.digikey.com/product-detail/en/panasonic-electronic-components/ERJ-3EKF10R0V/P10.0HCT-ND/198100

Resistors and capacitor are ok, but the op-amp must be in a SOIC-8 package. Yours is a TSSOP-8.
I think this one should be fine:
https://www.digikey.com/product-detail/en/stmicroelectronics/TS922IDT/497-6035-1-ND/1632064

[RetroRGB]

Thanks very much for finding the mistake!