Author Topic: White screen at bootup  (Read 3066 times)

0 Members and 1 Guest are viewing this topic.

Offline slayers_edge

  • Newbie
  • *
  • Posts: 5
  • Karma: +0/-0
    • View Profile
White screen at bootup
« on: October 04, 2016, 08:45 AM »
I have a white screen at boot when I use this on my Super Retro Advance Adapter via SFC, has anyone encountered this?

I have the OS in there, don't know why it's not reading it..

It might be my SD card.. I am not sure as well.

http://imgur.com/PHalDN8

Offline FeverDrive

  • Hero Member
  • *****
  • Posts: 1292
  • Karma: +54/-0
  • Blast Processing advocate
    • View Profile
Re: White screen at bootup
« Reply #1 on: October 04, 2016, 09:52 AM »
Have you tested the cartridge on real hardware (GBA, GBASP, DS or DSLite)?
WELCO
METOT
HENEX
TLEVEL

Offline lee4

  • codetype specialist
  • Hero Member
  • *****
  • Posts: 789
  • Karma: +45/-0
    • View Profile
    • gamehacking.org
Re: White screen at bootup
« Reply #2 on: October 04, 2016, 02:45 PM »
you need use official original power adapter and check everdrive is in correct into Super Retro Advance Adapter
ED64 v2.0, 3.0 & X7 | EDMD v3 | MEGAED X7 M15 v2.01 & PRO rev B | TED v2.4 | EDN8 v1.2N | SED v2.1 | SD2SNES rev E1 & PRO rev.B | EDGB v1.1 & X7 M17 rev B | EDGBA X5 M16 rev A
SNES jr | Super NT | Mega SG | Super Retro Advance | SGB v1 | PCE+SSD3

Offline slayers_edge

  • Newbie
  • *
  • Posts: 5
  • Karma: +0/-0
    • View Profile
Re: White screen at bootup
« Reply #3 on: October 04, 2016, 05:58 PM »
I have not tested the hardware on any official hardware yet! That's probably why..

I will purchase an GBASP then, but does trying the EDGBA on a third party hardware for the first time harm it?

Offline FeverDrive

  • Hero Member
  • *****
  • Posts: 1292
  • Karma: +54/-0
  • Blast Processing advocate
    • View Profile
Re: White screen at bootup
« Reply #4 on: October 05, 2016, 07:25 AM »
does trying the EDGBA on a third party hardware for the first time harm it?
Highly unlikely.
WELCO
METOT
HENEX
TLEVEL

Offline slayers_edge

  • Newbie
  • *
  • Posts: 5
  • Karma: +0/-0
    • View Profile
Re: White screen at bootup
« Reply #5 on: October 07, 2016, 01:57 AM »
So something new here, it works fine. But not at 100% success rate. I have to turn it on initially to get the white screen, and then turn it off and on again to get it working...

When I hit the SFC reset button, I get a C2 error for my SD card not being able to read.

My mem card is a Kingston 8GB Class 10
« Last Edit: October 07, 2016, 03:46 AM by slayers_edge »