Author Topic: MSU-1 too high  (Read 2884 times)

0 Members and 1 Guest are viewing this topic.

Offline NOBODY

  • LOADING...
  • Newbie
  • *
  • Posts: 24
  • Karma: +1/-0
    • View Profile
MSU-1 too high
« on: November 20, 2017, 01:00 PM »
Hi Guys,

I own SD2Snes rev.H and I noticed the MSU-1 Music is in some way too high. I know there is a way to increase the music up on settings, however I would like to know if there is possible to add the option to set the Music also low. It would be great.

I know in the past the guys was complaining the Music was too low. As I never had used this "MSU-1" before, I had no idea how good or bad that could sound to me.

Its not a personal request. Its just, in my simple opinion, something that could be great to everyone to have the possibility of
adjusting the volume as prefer.

Regards
Everdrive-N8 (1.3)
Famicom AV (Rev.H) Hi-Def NES (4.2)
Turbo Game CCE (VG-9000T)(NES Clone)

Everdrive-X7 (V2.01)
MegaDrive 1 JAP (VA4)
MegaDrive 1 EUR (M5+CIC)

SD2Snes (Rev.H)
Super Nintendo (USA.1CHIP01)
Super Nintendo (USA.GPM02)
Super Famicom (JAP.GPM01)
Analogue Super NT

Offline lee4

  • codetype specialist
  • Hero Member
  • *****
  • Posts: 792
  • Karma: +45/-0
    • View Profile
    • gamehacking.org
Re: MSU-1 too high
« Reply #1 on: November 20, 2017, 02:10 PM »
old msu audio files have incorrect volume

you can download msu audio files have correct volume
https://www.zeldix.net/t1339-msu-1-volume-fix-the-second-wave
ED64 v2.0, 3.0 & X7 | EDMD v3 | MEGAED X7 M15 v2.01 & PRO rev B | TED v2.4 | EDN8 v1.2N | SED v2.1 | SD2SNES rev E1 & PRO rev.B | EDGB v1.1 & X7 M17 rev B | EDGBA X5 M16 rev A
SNES jr | Super NT | Mega SG | Super Retro Advance | SGB v1 | PCE+SSD3

Offline dreimer

  • Sr. Member
  • ****
  • Posts: 304
  • Karma: +23/-0
    • View Profile
    • Reimi's Blog
Re: MSU-1 too high
« Reply #2 on: November 20, 2017, 08:55 PM »
And if one of your packs is not in that list, check if you have two patches. One for emulator and one for SD2SNES. In that case ALWAYS use the emulator one.

Offline SmokeMonster

  • Puzzle Bobbler
  • Sr. Member
  • ****
  • Posts: 412
  • Karma: +60/-0
  • tsst tchh chh ch ch ch
    • View Profile
    • SmokeMonster YouTube Channel
Re: MSU-1 too high
« Reply #3 on: November 21, 2017, 11:24 PM »
Actually, if you're on the latest hardware revision (H), you need to use the "SD2SNES" patches. Qwertymodo explains this in detail here: https://www.zeldix.net/t1265p100-fixing-all-of-the-too-loud-audio-packs-for-good#19720

Offline dreimer

  • Sr. Member
  • ****
  • Posts: 304
  • Karma: +23/-0
    • View Profile
    • Reimi's Blog
Re: MSU-1 too high
« Reply #4 on: November 22, 2017, 08:26 PM »
Actually, if you're on the latest hardware revision (H), you need to use the "SD2SNES" patches. Qwertymodo explains this in detail here: https://www.zeldix.net/t1265p100-fixing-all-of-the-too-loud-audio-packs-for-good#19720

You are right if the sound exists in a more silent version. Otherwise the emulator one is set to more silent inside the rom. No nice solution, but at least more silent.