Author Topic: Joyzz Availalbe for order!  (Read 36138 times)

0 Members and 2 Guests are viewing this topic.

Offline Thomu

  • Newbie
  • *
  • Posts: 24
  • Karma: +0/-0
    • View Profile
Re: Joyzz Availalbe for order!
« Reply #15 on: April 20, 2018, 03:14 PM »
Reviews will start pouring in after 10 days or so, the thing was released today and I don't think Krikzz sent review units to youtubers like Super NT did.

@Krikzz
The next big thing in demand is a DS3/DS4 to PS2 bluetooth adapter dongle.
http://www.brookaccessory.com/detail/44237976/

Also, you can use 2.1 edr bluetooth dongles if you use an open pos2 loader version that supports it.
« Last Edit: April 20, 2018, 03:18 PM by Thomu »
Own:EDN8|SD2SNESPRO|SD2SNES|MegaEDV2|MasterEDX7|EDGGX7|EDGBX7|EDGBAX5(x2)|ED64X7|ED64V3|ED64V2.5|PSIO(x2)|GDEMU|USBGDROM|Phoebe(x2)|WaspFusion(x3)|NGPSD(x2)|LynxSD|JagSD|EDGB|Flashboy+|SSDS3|NeoSDPro|MegaSD|EZFlashOmega(x3)|EDMDclone|GDEMUclone
Ordered:
To buy:EDN8PRO|EDGBAX7|MultiBoy32|LynxGD|

Offline Galron

  • Hero Member
  • *****
  • Posts: 625
  • Karma: +14/-0
    • View Profile
Re: Joyzz Availalbe for order!
« Reply #16 on: April 20, 2018, 03:56 PM »
Probably could use high quality raphnet adapters too.

Offline James-F

  • Sr. Member
  • ****
  • Posts: 340
  • Karma: +29/-0
    • View Profile
Re: Joyzz Availalbe for order!
« Reply #17 on: April 20, 2018, 07:06 PM »
@krikzz, why's the d-pad slanted?
Mega Everdrive x5, Everdrive 64 v3, Everdrive N8, N8 Pro, SD2SNES, Joyzz.

Offline FriendofSonic

  • Jr. Member
  • **
  • Posts: 60
  • Karma: +4/-0
    • View Profile
Re: Joyzz Availalbe for order!
« Reply #18 on: April 20, 2018, 10:06 PM »
I think it pretty much close to original controllers.
If demand will be good enough, i will make adapters for pc and controllers for another systems. In this case receivers for snes, for example, will be compatible with genesis controllers
Bruh. I'd use a six button Genesis pad on a SNES.

Offline sonicjhn

  • Newbie
  • *
  • Posts: 42
  • Karma: +1/-0
    • View Profile
Re: Joyzz Availalbe for order!
« Reply #19 on: April 21, 2018, 02:35 AM »
@krikzz, why's the d-pad slanted?

I also have the same question.

Offline FeverDrive

  • Hero Member
  • *****
  • Posts: 1253
  • Karma: +53/-0
  • Blast Processing
    • View Profile
Re: Joyzz Availalbe for order!
« Reply #20 on: April 21, 2018, 06:04 AM »
Great news, I hope Krikzz offers more wireless controllers for other systems in the future.
WELCO
METOT
HENEX
TLEVEL

Offline NeoXbit

  • Newbie
  • *
  • Posts: 26
  • Karma: +1/-0
    • View Profile
Re: Joyzz Availalbe for order!
« Reply #21 on: April 22, 2018, 03:37 AM »
That's just amazing, I totally forgot that this was in development. Can't wait to get my hands on one of those.

Offline James Cree

  • Full Member
  • ***
  • Posts: 159
  • Karma: +3/-0
    • View Profile
Re: Joyzz Availalbe for order!
« Reply #22 on: April 23, 2018, 08:37 AM »
I'll wait for v2 with the correctly aligned d-pad  ;)

Offline fandangos

  • Newbie
  • *
  • Posts: 26
  • Karma: +3/-0
    • View Profile
Re: Joyzz Availalbe for order!
« Reply #23 on: April 23, 2018, 02:13 PM »
Awesome work, Krikkz!

Do you think a turbo/rapid fire option triggered by a buttom combo for on and off could be added to the controller firmware?

If you plan building other controllers for other systems this is a must with nes/famicom, neo geo and pc engine/turbo grafx.

Offline morgan

  • Newbie
  • *
  • Posts: 28
  • Karma: +0/-0
    • View Profile
Re: Joyzz Availalbe for order!
« Reply #24 on: April 24, 2018, 01:21 PM »
I'm really looking into good 15-pin controllers for Famiclone systems.

Offline Podmax

  • Newbie
  • *
  • Posts: 8
  • Karma: +0/-0
    • View Profile
Re: Joyzz Availalbe for order!
« Reply #25 on: April 25, 2018, 11:11 PM »
Just ordered one! I'm curious if this means we will be seeing a Saturn controller as well?

Offline yoloswag420

  • Jr. Member
  • **
  • Posts: 83
  • Karma: +3/-0
    • View Profile
Re: Joyzz Availalbe for order!
« Reply #26 on: April 28, 2018, 02:36 AM »
Theoretically can't you put a receiver in all future models of your flashcarts and have a special "RESET" (or "bring back to menu") button on your new controllers? Even a cheap IR just for this purpose perhaps?

Heck, even just have an ir remote come with the premium flashcarts to do wireless reset so I dont have to walk over to the TV (#firstworldproblems)

Offline Thomu

  • Newbie
  • *
  • Posts: 24
  • Karma: +0/-0
    • View Profile
Re: Joyzz Availalbe for order!
« Reply #27 on: May 03, 2018, 04:23 PM »
I got my joyzz controllers today, they work great! one thing though. The receivers work on my master system model 1 but they don't fit all the way into the ports.
Own:EDN8|SD2SNESPRO|SD2SNES|MegaEDV2|MasterEDX7|EDGGX7|EDGBX7|EDGBAX5(x2)|ED64X7|ED64V3|ED64V2.5|PSIO(x2)|GDEMU|USBGDROM|Phoebe(x2)|WaspFusion(x3)|NGPSD(x2)|LynxSD|JagSD|EDGB|Flashboy+|SSDS3|NeoSDPro|MegaSD|EZFlashOmega(x3)|EDMDclone|GDEMUclone
Ordered:
To buy:EDN8PRO|EDGBAX7|MultiBoy32|LynxGD|

Offline James-F

  • Sr. Member
  • ****
  • Posts: 340
  • Karma: +29/-0
    • View Profile
Re: Joyzz Availalbe for order!
« Reply #28 on: May 06, 2018, 04:28 PM »
EDIT:
The d-pad been fixed in the second batch on.
/end edit.

My Joyzz has arrived, here's my review:

Plastic is high quality and does not crick and crack when the controller twisted, very solid.
Buttons have the right balance between clicky and mushy, very similar to modern controllers.
Rubber domes have excellent quality, really well done.
Buttons do not rattle, except the x,y,z buttons which are slightly looser.
PCB is very high quality as expected from Krizz.
The 2.4GHz wireless connection is rock solid and instantaneous, unlike bluetooth that takes time to sync.

Here are the shortcomings in my mind that hopefully fixed in the next revision:

The D-Pad is slanted only on the controller mold but NOT on the PCB, I think something went wrong with the controller or D-Pad mold.
I do not actually notice that it is slanted during gameplay, only when I look at it, so not big issue.

EDIT: Yep, the D-Pad shaft is slightly twisted in relation to the arrows, this is definitely a defect.
Not only the controller d-pad mold is slightly angles (by design) but the d-pad shaft too, combined result in a too much twist of the d-pad.
For 65$ I expect krikzz to fix this ASAP and send new D=Pad's to people who already bought one with the d-pad defect.

It passes the Street Fighter II moves execution test with flying colors.
It is the best Sega 6 button controller in my collection as of now.
Overall feels great and plays great, definitely recommended.

85/100



Original Joyzz:
Slanted D-Pad from mold defect.


Joyzz PCB:
Straight d-pad contacts.


Defective Joyzz D-Pad:
You can clearly see it's not centered.


Fixed D-Pad:
I replaced the d-pad from Hyperkin GN6, now it's fixed.


Once again, I expect krikzz to fix this ASAP and send new D-Pad's free of charge to people who already bought one with the d-pad defect.
Krikzz usually treats these kind of problems with... silence... hopefully he will give attention to this one.
« Last Edit: July 08, 2018, 08:39 AM by James-F »
Mega Everdrive x5, Everdrive 64 v3, Everdrive N8, N8 Pro, SD2SNES, Joyzz.

Offline KRIKzz

  • Administrator
  • Hero Member
  • *****
  • Posts: 3283
  • Karma: +491/-2
    • View Profile
Re: Joyzz Availalbe for order!
« Reply #29 on: May 07, 2018, 12:49 PM »
My Joyzz has arrived, here's my review:

I sent request to mold manufacturing company and waiting for response. Of course they can fix it, but question if how many time they need.
So you feeling any discomfort except visual aspect, may be false reaction on dpad?
During testing i play a lot in MK3 and it feels good, all combos and specials fires well. Controllers with low quality dpads, or even original controllers in bad condition become useless in this game. Especially clearly it felt with subzero and his ice specials, which constantly occurs when you don't want it, but you can't make it when you want.