Author Topic: Joyzz Availalbe for order!  (Read 17523 times)

0 Members and 1 Guest are viewing this topic.

Offline KRIKzz

  • Administrator
  • Hero Member
  • *****
  • Posts: 3048
  • Karma: +469/-2
    • View Profile
Joyzz Availalbe for order!
« on: April 20, 2018, 12:24 AM »
Finally, after years (:
https://krikzz.com/store/home/52-master-everdrive.html

Features:

.Wireless controllers for SEGA Genesis/Megadrive. Can be used with master system as well
.Low power consumption. Up to 150 hours of gameplay at one charge
.Power saving mode. Battery discharge time in this mode more than year. If there is no any activity for a few minutes controller switches to power saving mode, after pushing on start or d-pad buttons controller immediately will back to active state.
.Quick response, no input lags. Response time around 2.7ms
.Special compatibility mode with genesis 3-buttons and SMS controllers. Some games does not work properly with 6-buttons controllers, but joyzz offer compatibility mode to solve this problem
.800mAh li-ion battery compatible with Nokia BL-4C series. Such batteries became the standard and they easy to buy and replace in the end of life time
.Charging via micro-usb port


Special functions:

1. Force power saving mode: Hold MODE+A+X and then click START

2. Exit from power saving mode: START or any key on D-PAD

3. 3-buttons controller mode: Hold for 3 sec. MODE+START+C. Required for some games which not compatible with 6-buttons controllers. Golden Axe II, for example

4. SMS controller mode:  Hold for 3 sec. MODE+START+B. Required for some SMS games which is not compatible with genesis controllers.

5. Switch controller to normal 6-buttons mode:  MODE+START+Z

6. Sync controller with receiver: Hold sync button on receiver for 4 sec until led on receiver will start blinking. Hold MODE+X+Y+Z until led went out.

All compatibility modes (combo 3 and 4) will resets to default after power cycle on receiver

Receiver indication:

1. Constant led shining: Controller is not connected.

2. Led turned off: Controller connected

3. Slow light pulsation: Low battery level





« Last Edit: April 20, 2018, 01:32 AM by KRIKzz »

Offline Deltax5

  • Full Member
  • ***
  • Posts: 151
  • Karma: +1/-0
    • View Profile
Re: Joyzz Availalbe for order!
« Reply #1 on: April 20, 2018, 01:09 AM »
seems cool. wish it had the slow and turbo like one of my official 6 button controllers I have. still waiting for review thou.
Any means of making a corded one with all that?
« Last Edit: April 20, 2018, 01:13 AM by Deltax5 »

Offline FriendofSonic

  • Jr. Member
  • **
  • Posts: 59
  • Karma: +4/-0
    • View Profile
Re: Joyzz Availalbe for order!
« Reply #2 on: April 20, 2018, 01:10 AM »
Wow! This is exciting... I'm very curious to know if this replicates the feel of my favorite Genesis pad, the six button MK-1653.

Also, does the SMS mode offer pause button functionality in the SMS? I'm going to guess no, that would require a mod to the system itself.

Offline KRIKzz

  • Administrator
  • Hero Member
  • *****
  • Posts: 3048
  • Karma: +469/-2
    • View Profile
Re: Joyzz Availalbe for order!
« Reply #3 on: April 20, 2018, 01:22 AM »
seems cool. wish it had the slow and turbo like one of my official 6 button controllers I have. still waiting for review thou.
Any means of making a corded one with all that?

Corded version not planned.

Wow! This is exciting... I'm very curious to know if this replicates the feel of my favorite Genesis pad, the six button MK-1653.

Also, does the SMS mode offer pause button functionality in the SMS? I'm going to guess no, that would require a mod to the system itself.

Right, no sms pause

Offline SmokeMonster

  • Puzzle Bobbler
  • Sr. Member
  • ****
  • Posts: 415
  • Karma: +58/-0
  • tsst tchh chh ch ch ch
    • View Profile
    • SmokeMonster YouTube Channel
Re: Joyzz Availalbe for order!
« Reply #4 on: April 20, 2018, 02:49 AM »
They turned out extremely nice. Well done, Krikzz :D

Offline sonicjhn

  • Newbie
  • *
  • Posts: 37
  • Karma: +1/-0
    • View Profile
Re: Joyzz Availalbe for order!
« Reply #5 on: April 20, 2018, 03:30 AM »
Why the D-Pad left-right are not perfectly aligned horizontally with the Start button? The D-pad "right" button looks a quite a bit shifted down diagonally.

This doesn't happen in the Sega controller.

Offline Assman

  • Full Member
  • ***
  • Posts: 167
  • Karma: +14/-0
    • View Profile
Re: Joyzz Availalbe for order!
« Reply #6 on: April 20, 2018, 04:07 AM »
Why the D-Pad left-right are not perfectly aligned horizontally with the Start button? The D-pad "right" button looks a quite a bit shifted down diagonally.

This doesn't happen in the Sega controller.

Check out this picture (the angle is much more in line with what's expected):



This is extremely cool. I'll be very interested to see the reviews.

Offline James-F

  • Sr. Member
  • ****
  • Posts: 314
  • Karma: +24/-0
    • View Profile
Re: Joyzz Availalbe for order!
« Reply #7 on: April 20, 2018, 08:40 AM »
Just grabbed a Joyzz, gonna' test the heck out of it.

I have to say that Hyperkin GN6 is a great replica of the Sega 6 button, and has almost the same feel as the original.
It's currently my main Genesis controller.
The D-pad feel and diagonals triggering will set apart a good controller from the average ones.

I hope the Joyzz is to the original 6 button, like the 8Bitdo SFC30 is to the original.

---
Is the receiver updatable, or unlike 8bitdo bluetooth modules the simpler 2.4Ghz receiver doesn't need updates?
What if something's wrong with the receiver, can it be updated?
I really don't want to RMA stuff.
« Last Edit: April 20, 2018, 08:46 AM by James-F »
Mega Everdrive x5, Everdrive 64 v3, Everdrive N8, SD2SNES, Joyzz.

Offline nihlathak

  • Jr. Member
  • **
  • Posts: 80
  • Karma: +0/-0
    • View Profile
Re: Joyzz Availalbe for order!
« Reply #8 on: April 20, 2018, 11:14 AM »
Nice, I have been waiting for these! Going to pick up a set somewhere soon!
SD2SNES | EverDrive-GBA X5 | EverDrive-64 v3 | Mega EverDrive X7 | EverDrive-GB X7 | EverDrive N8 NES

Offline Galron

  • Full Member
  • ***
  • Posts: 204
  • Karma: +10/-0
    • View Profile
Re: Joyzz Availalbe for order!
« Reply #9 on: April 20, 2018, 12:34 PM »
How does it feel compared to classic Sega controller in build quality?

Any chance for an adapter for PC/RetroPie emulation? Maybe an adapter that would work with NES/SNES/Wii as well? Since  they can be hacked and run Sega games.

Offline KRIKzz

  • Administrator
  • Hero Member
  • *****
  • Posts: 3048
  • Karma: +469/-2
    • View Profile
Re: Joyzz Availalbe for order!
« Reply #10 on: April 20, 2018, 12:51 PM »
How does it feel compared to classic Sega controller in build quality?

Any chance for an adapter for PC/RetroPie emulation? Maybe an adapter that would work with NES/SNES/Wii as well? Since  they can be hacked and run Sega games.

I think it pretty much close to original controllers.
If demand will be good enough, i will make adapters for pc and controllers for another systems. In this case receivers for snes, for example, will be compatible with genesis controllers

Offline ErivandoXP

  • Jr. Member
  • **
  • Posts: 64
  • Karma: +7/-0
    • View Profile
Re: Joyzz Availalbe for order!
« Reply #11 on: April 20, 2018, 02:15 PM »
Congratulations, it looks great!

I hope you make it to other consoles too!

Add to Wish List!

Offline Galron

  • Full Member
  • ***
  • Posts: 204
  • Karma: +10/-0
    • View Profile
Re: Joyzz Availalbe for order!
« Reply #12 on: April 20, 2018, 02:35 PM »
How does it feel compared to classic Sega controller in build quality?

Any chance for an adapter for PC/RetroPie emulation? Maybe an adapter that would work with NES/SNES/Wii as well? Since  they can be hacked and run Sega games.

I think it pretty much close to original controllers.
If demand will be good enough, i will make adapters for pc and controllers for another systems. In this case receivers for snes, for example, will be compatible with genesis controllers

Thanks, I meant SNES/NES Classic Mini Editions in my initial post since they use Wii plug type. Would definitely love to see an adapter for those.

Offline Retro-Nerd

  • Full Member
  • ***
  • Posts: 134
  • Karma: +4/-0
    • View Profile
Re: Joyzz Availalbe for order!
« Reply #13 on: April 20, 2018, 02:45 PM »
Great work, Krikzz. And 150 hours with one charge is really something.

Quote
If demand will be good enough, i will make adapters for pc and controllers for another systems. In this case receivers for snes, for example, will be compatible with genesis controllers.

I'm pretty sure the demand is really high. People just need to know that you built a quality wireless Sega 6 Button clone. Would buy one of this adapters instantly.  :)

What about the Amiga? I mean the pad already supports the Master System games. Is it working  there too?



Offline James-F

  • Sr. Member
  • ****
  • Posts: 314
  • Karma: +24/-0
    • View Profile
Re: Joyzz Availalbe for order!
« Reply #14 on: April 20, 2018, 02:56 PM »
Reviews will start pouring in after 10 days or so, the thing was released today and I don't think Krikzz sent review units to youtubers like Super NT did.

@Krikzz
The next big thing in demand is a DS3/DS4 to PS2 bluetooth adapter dongle.
« Last Edit: April 20, 2018, 03:08 PM by James-F »
Mega Everdrive x5, Everdrive 64 v3, Everdrive N8, SD2SNES, Joyzz.