EDN8 Pro V2.03

[BarbieOnWeed]

EDN8-V2.03 05.01.2020

1) New mappers: 208, 195, 261
2) Changed FDS autoswap controller.
3) Fixes for mapper 99, 198, 4

http://krikzz.com/pub/support/everdrive-n8/pro-series/OS/EDN8-V2.03.zip

[Sarge]

Looking forward to this getting ported to the OG version. I'm guessing the issues fixed in mapper 4 are also the ones affecting Karnov, which apparently uses one of the Namcot chips. Those were an earlier, more limited version of the MMC3, and apparently work with an MMC3 implementation. Probably what KRIKzz is doing here as well.

[lord_raymon]

Thanks KRIKzz; I was asking for mapper 261 here...

http://krikzz.com/forum/index.php?topic=9542.0

... but I can't make 200-in-1 - Elfland multicart to work

[KRIKzz]

Thanks KRIKzz; I was asking for mapper 261 here...

http://krikzz.com/forum/index.php?topic=9542.0

... but I can't make 200-in-1 - Elfland multicart to work

Must be bad rom or your rom in UNIF format. I didn't found rom int INES format so i used unf2nes for conversion one from CaH4e3 pack.

[fernan1234]

Thanks for making this thread! I hadn't realized two updates had been released after the first firmware, including one that adds support for Famicom expansion controllers that I requested earlier. Now I can move on completely from the old N8. Thanks a lot KRIKzz!

[lord_raymon]

Thanks KRIKzz; I was asking for mapper 261 here...

http://krikzz.com/forum/index.php?topic=9542.0

... but I can't make 200-in-1 - Elfland multicart to work

Must be bad rom or your rom in UNIF format. I didn't found rom int INES format so i used unf2nes for conversion one from CaH4e3 pack.

I have tested with emulator and it works. My rom has .nes extenxion but maybe is in UNIF I don't know (I don't know how to use unf2nes ).

If someone can make it work tell me how

Again thank you very much for your efforts!