Author Topic: SD2SNES Pro problems  (Read 2959 times)

0 Members and 1 Guest are viewing this topic.

Offline tden85

  • Newbie
  • *
  • Posts: 11
  • Karma: +0/-0
    • View Profile
SD2SNES Pro problems
« on: April 14, 2019, 01:54 AM »
Just got my universal cart in the mail and I'm having 2 issues:

1) Does not fit well in my SNES. The tab that pushes out when you press in the "power" tab does not align right with the groove in the face of the cartridge. If I barely push the cart into the SNES it will fit okay. This is annoying, but not the end of the world. The other issue is the bigger deal . . .

2) There are lines on the screen and the games are playing choppy. This is really pronounced on the intro for FF3 which I've attached an image of. The game loaded up, cut out, and then was working . . . sort of, but I'm getting these lines. I know the files work fine because I was playing them on an everdrive just earlier today (and have been for months!). I tried a few other games and I'm having the same issue.

I am a newb when it comes to this stuff, so maybe I'm missing something here. But considering the cartridge doesn't fit in my snes and I just dropped $200 bucks on this, I'm not feeling really happy about this purchase right now. 


Offline EverDriver

  • Administrator
  • Hero Member
  • *****
  • Posts: 547
  • Karma: +42/-0
  • support
    • View Profile
Re: SD2SNES Pro problems
« Reply #1 on: April 14, 2019, 10:27 AM »
Hi!

Please make photos of the cartridge and console and upload it here.

Thanks!

Offline tden85

  • Newbie
  • *
  • Posts: 11
  • Karma: +0/-0
    • View Profile
Re: SD2SNES Pro problems
« Reply #2 on: April 14, 2019, 09:42 PM »
With the picture of the cartridge, I'm not sure if it's easy to see, but the catridge is pushed back at an angle when I push the power on.

Offline Relikk

  • Sr. Member
  • ****
  • Posts: 274
  • Karma: +23/-8
    • View Profile
Re: SD2SNES Pro problems
« Reply #3 on: April 14, 2019, 10:35 PM »
Did you try using it without the shell to see if there was a difference?
« Last Edit: April 14, 2019, 10:43 PM by Relikk »

Offline tden85

  • Newbie
  • *
  • Posts: 11
  • Karma: +0/-0
    • View Profile
Re: SD2SNES Pro problems
« Reply #4 on: April 15, 2019, 02:06 AM »
No, but I know that the groove in the face of the cartridge is the issue. Comparing it to my Everdrive, the Everdrive groove is bigger and fits perfectly. The SD2SNES PRO is smaller and maybe not as deep. Otherwise the cartridges are the same exact size.

Just now I took off the front and at fits fine. However, I'm still having the same MAIN issue: the lines on the screen, games playing glitchy,  choppy and cutting in and out.

These are all roms that work fine and have been working fine for the last 6 months on the everdrive cart I have.

DO you know what the issue is with that?

Offline lee4

  • codetype specialist
  • Hero Member
  • *****
  • Posts: 730
  • Karma: +43/-0
    • View Profile
    • gamehacking.org
Re: SD2SNES Pro problems
« Reply #5 on: April 15, 2019, 04:57 AM »
are you using official power adapter or 3rd power adapter?
sd2snes draws more power to power special chip features
ED64 v2.0 & v3.0 | EDMD v3 | MEGAED X7 M15 v2.01 | TED v2.4 | EDN8 v1.2N | SED v2.1 | SD2SNES rev E1 & PRO rev.B | EDGB v1.1 & X7 M17 rev B | EDGBA X5 M16 rev A
Super NT | Mega SG | Super Retro Advance | SGB v1 | PCE+SSD3

Offline tden85

  • Newbie
  • *
  • Posts: 11
  • Karma: +0/-0
    • View Profile
Re: SD2SNES Pro problems
« Reply #6 on: April 16, 2019, 06:59 AM »
I am using the official power adapter that came with my SNES. It's an official Super Nintendo adapter.

Offline tden85

  • Newbie
  • *
  • Posts: 11
  • Karma: +0/-0
    • View Profile
Re: SD2SNES Pro problems
« Reply #7 on: April 16, 2019, 07:12 AM »
And just to recap, these are the issues:

Video/audio cutting in and out
Lines cutting across screen
Screen getting scrambled

The menu is fine. Doesn't glitch out on me. But whenever I load a game, it's unstable/unplayable.

I downloaded the latest 1.10.3 firmware. Could that be the issue?

Offline JonJonXD

  • Newbie
  • *
  • Posts: 6
  • Karma: +0/-0
    • View Profile
Re: SD2SNES Pro problems
« Reply #8 on: April 16, 2019, 07:39 PM »
That firmware has been reported to be unstable, so it would be wise to run 1.10.2.

I personally haven't been having issues with .3 on an American snes with the HD retro vision cables on my CRT.

Offline mitchtaylor

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
    • View Profile
Re: SD2SNES Pro problems
« Reply #9 on: April 25, 2019, 01:51 AM »
Did you try using it without the shell to see if there was a difference?

Please do not try this friends.  My card became stuck and I have damaged it on removal. 

https://photos.app.goo.gl/D7ZLznzxXP7RNgkG7

Offline Relikk

  • Sr. Member
  • ****
  • Posts: 274
  • Karma: +23/-8
    • View Profile
Re: SD2SNES Pro problems
« Reply #10 on: April 25, 2019, 09:44 AM »
Easily avoidable.

Offline decommand

  • Newbie
  • *
  • Posts: 25
  • Karma: +1/-0
    • View Profile
Re: SD2SNES Pro problems
« Reply #11 on: April 26, 2019, 09:22 AM »
Comparing it to my Everdrive, the Everdrive groove is bigger and fits perfectly.
These are all roms that work fine and have been working fine for the last 6 months on the everdrive cart I have.

Your super everdrive cartridge is a clone fake, you should send it back to  seller and ask a full refund.


Offline Relikk

  • Sr. Member
  • ****
  • Posts: 274
  • Karma: +23/-8
    • View Profile
Re: SD2SNES Pro problems
« Reply #12 on: April 26, 2019, 11:37 AM »
Comparing it to my Everdrive, the Everdrive groove is bigger and fits perfectly.
These are all roms that work fine and have been working fine for the last 6 months on the everdrive cart I have.

Your super everdrive cartridge is a clone fake, you should send it back to  seller and ask a full refund.

It's a Pro. He posted pictures. Nigh on impossible that it's a clone at this early stage.

Offline Galron

  • Hero Member
  • *****
  • Posts: 590
  • Karma: +14/-0
    • View Profile
Re: SD2SNES Pro problems
« Reply #13 on: April 26, 2019, 06:39 PM »
Ya, the pictures match up with the version sold directly from Krikkz...

https://krikzz.com/store/home/54-sd2snes-pro.html

Offline goldenband

  • Newbie
  • *
  • Posts: 21
  • Karma: +1/-0
    • View Profile
Re: SD2SNES Pro problems
« Reply #14 on: April 26, 2019, 10:49 PM »
Comparing it to my Everdrive, the Everdrive groove is bigger and fits perfectly.
These are all roms that work fine and have been working fine for the last 6 months on the everdrive cart I have.

Your super everdrive cartridge is a clone fake, you should send it back to  seller and ask a full refund.

It's a Pro. He posted pictures. Nigh on impossible that it's a clone at this early stage.

My impression was that decommand meant that the poster's Super EverDrive (not his SD2SNES) is a fake, because of the description of the difference in groove size. (Assuming decommand's post is sincere, that is.)
Have EverDrives: N8 (Famicom), Master ED, Turbo ED, ED MD, Super ED, ED 64, ED-GB, ED-GG, ED-GBA X5

Other flashcarts & multicarts: Harmony (Atari 2600), Cuttle Cart 3 (Intellivision), 233-in-1 (Odyssey^2), 72-in-1 (Vectrex), LynxSD (Atari Lynx), SD2SNES