Author Topic: Can't Sync Joyzz to Receiver  (Read 494 times)

0 Members and 1 Guest are viewing this topic.

Offline oks_8376299

  • Newbie
  • *
  • Posts: 4
  • Karma: +0/-0
    • View Profile
Can't Sync Joyzz to Receiver
« on: April 25, 2019, 03:31 AM »
 :-[
Just received my Joyzz in the mail and can't sync with receiver (using Mega SG), I:
- Connect the receiver and start the device
- Mega SG boots and receiver has solid red light
- I hold the sync button on the receiver and light starts blinking
- I hold Mode +XYZ on the controller
and
Nothing happens. The LED never shuts off and there is no sync. This is literally just taken out of the box.
Any ideas?

Offline oks_8376299

  • Newbie
  • *
  • Posts: 4
  • Karma: +0/-0
    • View Profile
Re: Can't Sync Joyzz to Receiver
« Reply #1 on: April 25, 2019, 02:15 PM »
To update - I left this plugged into USB overnight in hopes that charging might help. No difference.
I hold the key combination Mode +XYZ and the red light continues blinking, so no sync.
Unless there are any other suggestions I have to assume this is defective.
Should I go about returning through Amazon?

Offline oks_8376299

  • Newbie
  • *
  • Posts: 4
  • Karma: +0/-0
    • View Profile
Re: Can't Sync Joyzz to Receiver
« Reply #2 on: April 28, 2019, 12:28 AM »
I had this replaced by Amazon and I still have the same issue.
I turn on the Mega SG, LED lights up solid red on the receiver.
Hold down the sync button on the the receiver until the LED starts blinking.
I then hold mode+ xyz on the controller.
Nothing happens. The light continues to blink and no sync.
I myself admit it seems unlikely that I've received two defective controllers in a row, but I struggle to see what I'm doing wrong here.
Any ideas?

Offline KRIKzz

  • Administrator
  • Hero Member
  • *****
  • Posts: 3073
  • Karma: +473/-2
    • View Profile
Re: Can't Sync Joyzz to Receiver
« Reply #3 on: April 28, 2019, 02:56 AM »
receiver and controller pair usually comes already synchronized. it can be discharged battery, or controller in sleep state. To return from sleep state you should push start or one of dpad directions.

Offline oks_8376299

  • Newbie
  • *
  • Posts: 4
  • Karma: +0/-0
    • View Profile
Re: Can't Sync Joyzz to Receiver
« Reply #4 on: April 28, 2019, 07:55 PM »
Thanks for replying, it works now!
I left the controller to charge overnight. Plugged in and started the mega sg and it was paired.
Look forward to using it!

Offline cmoliveira

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
    • View Profile
Re: Can't Sync Joyzz to Receiver
« Reply #5 on: July 14, 2019, 06:11 AM »
Bumping this thread since I have the exact same problems as above only it still will not work, except in one case: If it's plugged into the wall, controller works without issue. Once it's unplugged, it doesn't work.

Tried synching, tried hitting any/all buttons, and tried leaving it plugged in all night with multiple chargers and cables. Still get nothing.

Any help would be appreciated!

Offline falconx62

  • Newbie
  • *
  • Posts: 2
  • Karma: +0/-0
    • View Profile
Re: Can't Sync Joyzz to Receiver
« Reply #6 on: July 15, 2019, 07:02 PM »
I have the same problem!

You returned me a new joyzz (the first one had the z button not responsive) and now, with the new one, I can only use it when it's plugged.

I'm fed up with the joyzz, it's a great pad but there's too many problems. At this price, it's a shame!!!

Can I hace a refund?