Author Topic: EDN8 Pro V2.03  (Read 1517 times)

0 Members and 1 Guest are viewing this topic.

Offline BarbieOnWeed

  • Jr. Member
  • **
  • Posts: 98
  • Karma: +4/-0
    • View Profile
EDN8 Pro V2.03
« on: January 06, 2020, 07:23 PM »
EDN8-V2.03 05.01.2020

1) New mappers: 208, 195, 261
2) Changed FDS autoswap controller.
3) Fixes for mapper 99, 198, 4

http://krikzz.com/pub/support/everdrive-n8/pro-series/OS/EDN8-V2.03.zip

Offline Sarge

  • Sr. Member
  • ****
  • Posts: 328
  • Karma: +16/-0
    • View Profile
Re: EDN8 Pro V2.03
« Reply #1 on: January 07, 2020, 12:13 AM »
Looking forward to this getting ported to the OG version. I'm guessing the issues fixed in mapper 4 are also the ones affecting Karnov, which apparently uses one of the Namcot chips. Those were an earlier, more limited version of the MMC3, and apparently work with an MMC3 implementation. Probably what KRIKzz is doing here as well.
Hardcore Retro Gaming - Discuss games ten years old or older! Now with a modern gaming section!

http://hardcoreretrogaming.boards.net/

Offline lord_raymon

  • Jr. Member
  • **
  • Posts: 71
  • Karma: +3/-0
    • View Profile
Re: EDN8 Pro V2.03
« Reply #2 on: January 07, 2020, 12:53 AM »
Thanks KRIKzz; I was asking for mapper 261 here...

http://krikzz.com/forum/index.php?topic=9542.0

... but I can't make 200-in-1 - Elfland multicart to work :-\


Offline KRIKzz

  • Administrator
  • Hero Member
  • *****
  • Posts: 3305
  • Karma: +495/-2
    • View Profile
Re: EDN8 Pro V2.03
« Reply #3 on: January 07, 2020, 02:00 AM »
Thanks KRIKzz; I was asking for mapper 261 here...

http://krikzz.com/forum/index.php?topic=9542.0

... but I can't make 200-in-1 - Elfland multicart to work :-\



Must be bad rom or your rom in UNIF format. I didn't found rom int INES format so i used unf2nes for conversion one from CaH4e3 pack.

Offline fernan1234

  • Jr. Member
  • **
  • Posts: 57
  • Karma: +1/-0
    • View Profile
Re: EDN8 Pro V2.03
« Reply #4 on: January 07, 2020, 08:20 PM »
Thanks for making this thread! I hadn't realized two updates had been released after the first firmware, including one that adds support for Famicom expansion controllers that I requested earlier. Now I can move on completely from the old N8. Thanks a lot KRIKzz!


Offline lord_raymon

  • Jr. Member
  • **
  • Posts: 71
  • Karma: +3/-0
    • View Profile
Re: EDN8 Pro V2.03
« Reply #5 on: January 08, 2020, 09:32 PM »
Thanks KRIKzz; I was asking for mapper 261 here...

http://krikzz.com/forum/index.php?topic=9542.0

... but I can't make 200-in-1 - Elfland multicart to work :-\



Must be bad rom or your rom in UNIF format. I didn't found rom int INES format so i used unf2nes for conversion one from CaH4e3 pack.

I have tested with emulator and it works. My rom has .nes extenxion but maybe is in UNIF I don't know (I don't know how to use unf2nes :-\).

If someone can make it work tell me how ;)

Again thank you very much for your efforts! ;D