Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - nuu

Pages: [1] 2 3 ... 149
1
How long do you wait before powering on again?

2
Can't be a hardware limitation. Even MODE is a perfectly normal readable button. Probably an arbitrary decision since these buttons are not always available. Some games even requires a normal 3-button controller.

3
EverDrive 64 / Re: N64Digital HDMI kit with Everdrive
« on: September 22, 2021, 09:01 AM »
I don't agree that 100% accuracy is useless to gamers. Some games are unplayable when played on the wrong region due to sound stutter, and speed running is out of the question on the wrong region.

Basically, I just want to know whether the N64 digital (installed to either a NTSC or PAL) console can play ALL roms using an Everdrive?

Or whether:

a) NTSC console (with N64Digital mod) can only play NTSC roms with Everdrive?
and
b) PAL console (with N64Digital mod) console can only play PAL roms with Everdrive?

Thanks in advance.
It sounds like N64Digital has an option for substituting the video clock and provide correct timing for both NTSC and PAL on either console, so either region should be fine. As long as your Everdrive 64 V3 isn't too old it should have an UltraCIC and you would be set with this mod.
For older flashcarts and real carts you may also need the UltraPIF and to mod the cart slot for true region freedom.

If you have both an NTSC and PAL N64 there is no need for any mod, you can play all games perfectly already, real carts or flashcarts. Your TV must support both NTSC and PAL.

4
Mega EverDrive / Re: JVC X'Eye and Mega Everdrive Pro
« on: September 21, 2021, 01:39 PM »
You need to be able to unplug the Mega CD to use the Mega CD feature of the Pro. So a built-in Mega CD may be a problem.

5
EverDrive 64 / Re: N64Digital HDMI kit with Everdrive
« on: September 21, 2021, 01:26 PM »
It's always possible and it always has at least minor problems. But it should probably take care of any color problems.

6
EverDrive 64 / Re: Looking for address to download Bootloader V3 file
« on: September 21, 2021, 01:24 PM »
Why do you need that? I think it was removed to prevent people from bricking their Everdrives.

7
EverDrive 64 / Re: Weird lines for NTSC games
« on: September 19, 2021, 01:53 PM »
Yes the TV, many TVs has problems with the hybrid signal that may come from running an NTSC game on a PAL N64. You would be lucky if it worked.

This problem can still be fixed if you get an NTSC N64 (Japanese or North American) for NTSC games, as long as your TV supports standard NTSC. Newer CRT PAL TVs usually do support standard NTSC.
Just keep your PAL N64 for PAL games as an NTSC N64 is not ideal for PAL games, even though PAL TVs usually support the hybrid PAL60 signal that may come from that case.

8
EverDrive 64 / Re: Zelda OOT and MM NGC PAL 50hz on Everdrive 64
« on: September 19, 2021, 01:36 PM »
I have never programmed the N64 so I don't really know how it works in detail, and I can't prove anything. I just assumed the programmer has the power to affect the refresh rate and resolution like on many older systems. The Atari 2600 and the PC Engine both gives the programmer this kind of power (the PC Engine because its video hardware offers flexible options and the Atari because its video hardware is so rudimentary and handled mostly manually). The N64 video hardware can be reprogrammed using "microcode", which I assume gives the programmer much power of both audio and video generation. Many games uses one of Nintendo's premade programmings however, and maybe these are forcing VSYNC to always be 50 or 60Hz depending on some manually set region flag instead of basing it on what system region is detected, and that could be why so many games might be doing that.

I assumed 61Hz is because it's hard to cap it to exact NTSC standard using software, and because of the different video clock in the PAL version. I didn't think such small timing differences was such a big deal on a CRT, but modern TVs and scalers might have problems with it.

9
EverDrive GB / Re: does this work for GBC games ?
« on: September 19, 2021, 12:20 PM »
Ok in that case trading might be the easiest solution.

10
EverDrive 64 / Re: Zelda OOT and MM NGC PAL 50hz on Everdrive 64
« on: September 17, 2021, 01:59 PM »
You are probably right. I'm just quoting what people that knows more than me about this have previously said on the forum.

They said that only the video clock (also affects audio) is different on the different regions, and only slightly so. The numbers that I have are NTSC = 48.681812MHz, PAL = 49.65653MHz and PAL-M = 48.628316MHz. The CPU clock is 93.75MHz on all regions. The video clock difference is only 2% which seldom is noticeable in a game that was made for one region but is played on another.
But the frame rate becomes 60 or 50Hz regardless of region in games that are hardwired to make VBLANK always fire at either 60Hz or 50Hz.

11
EverDrive GB / Re: does this work for GBC games ?
« on: September 17, 2021, 01:39 PM »
If it didn't even support normal saving it wouldn't be much use of a flashcart. I think trading works even with 2nd gen. If you just use the Everdrive GB as a means to trade to/from a second save file the RTC might not matter. You don't even need to return to the Everdrive menu to save the changes on X3 after a trade, unless you want to prevent duplicating the monster you are trading. But I haven't tried it myself and can't confirm it.

If you have the real cart and the ability to dump and restore the SRAM you can move the save file you want to appear in Stadium to your real cart and use that with the Transfer Pak. Trading is only good for maybe one or two monsters in Pokemon, but you can't trade things like items which can also be stored in Pokemon Stadium, and there are other games using the Transfer Pak which won't work.

12
EverDrive 64 / Re: Zelda OOT and MM NGC PAL 50hz on Everdrive 64
« on: September 16, 2021, 03:34 PM »
That's not any different from what I just said. Color problems on the N64 seem to happen when you play on the wrong region for the game and the TV doesn't support PAL60 or NTSC50 which happens when a game caps 60Hz and 50Hz on a PAL and NTSC console respectively. RGB modding should help with that problem since you can use any frame rate with RGB.

I think 50Hz and 60Hz are defined in the PAL and NTSC standards though, that's why PAL60 and NTSC50 are considered non-standard, although PAL60 is commonly supported by PAL TVs along with NTSC 4.43 which is another non-standard thing.

13
Mega EverDrive / Re: SMS roms with Mega Everdrive Pro on Mega Sg
« on: September 16, 2021, 02:44 PM »
SMS BIOS are between 8 and 256kB depending on if they have a built-in game or not and the size of that game, I believe any size should work. On a real SMS the non-Japanese BIOS locks out Japanese games while Japanese BIOS should play any game (for compatibility with the Mark III and SG-1000 which lacks a BIOS).

I suggest to try the no-intro dump called "[BIOS] Sega Master System (Japan) (v2.1).sms" (8kB with no built-in game).
If you have a non-Japanese game that requires another BIOS for some reason, try "[BIOS] Sega Master System (USA, Europe) (v1.3).sms" (8kB with Snail Maze).

14
EverDrive 64 / Re: Zelda OOT and MM NGC PAL 50hz on Everdrive 64
« on: September 16, 2021, 01:54 PM »
RGB modding won't help with the speed difference because different clocks in NTSC and PAL N64 systems, and games may cap their speed to 50Hz or 60Hz regardless which system they are played on. Colors are encoded in the N64 and depends only on region of the system, not on the game region.

15
EverDrive GB / Re: does this work for GBC games ?
« on: September 16, 2021, 12:48 PM »
Yes, all Everdrive GB versions, even the oldest ones (before the X-versions) can run the first Pokemon generation (red, green, blue and yellow).

Yes, trading with another Gameboy is not a problem no matter if both carts are real or flashcarts. It's not really emulation, the game runs on the Gameboy not on the cart, so there is no difference from the real cart once it's running thus trading works.

Yes, all Everdrive GB versions works on the SGB and the Gameboy Player.

Any Everdrive GB should work for trading.
Only the N64 Transfer Pak is a problem and none of the Everdrives works with that since they all boot from a master menu.
For Pokemon Gold, Silver Crystal you need the X7 because of the RTC. These games should at least boot on any Everdrive GB though so trading probably works but I'm not sure what the consequences are, and the games are not really enjoyable without the RTC.

Pages: [1] 2 3 ... 149