EverDrive Forum

General => EverDrive N8 => Topic started by: Jennifer on August 12, 2018, 02:13 PM

Title: ED N8 60 pin not working on famiclone
Post by: Jennifer on August 12, 2018, 02:13 PM
Hi all

I received my ED N8 60 pin about 6 months ago. Today Im trying to get it to work on my Famiclone but I only get a black / blank screen when I turn the famiclone on. Not sure if the ED is faulty. Its brand new and an origianl from Krikzz. I followed all instructions, tried two different sdc's and pressed reset 5x, 8x, 10x without success.
Would appreciate any help.

Thanks.
Title: Re: ED N8 60 pin not working on famiclone
Post by: PalAndreew on August 12, 2018, 06:31 PM
Hi all

I received my ED N8 60 pin about 6 months ago. Today Im trying to get it to work on my Famiclone but I only get a black / blank screen when I turn the famiclone on. Not sure if the ED is faulty. Its brand new and an origianl from Krikzz. I followed all instructions, tried two different sdc's and pressed reset 5x, 8x, 10x without success.
Would appreciate any help.

Thanks.

The most simple reason: poor nutrition. not an adapter, but inside the famiclone - a very weak power regulator. replacement adapter or surgery inside the console: vain and will not help!

look for either the original famicom or very, very old clones (early 90's) ... But it's impoàrtant to remember: old things can be worn out or damaged. just remember this!
Title: Re: ED N8 60 pin not working on famiclone
Post by: tic on January 31, 2019, 02:21 AM
Yeah, thats the model with microusb right?. Only the model that use the normal power socket work.
Title: Re: ED N8 60 pin not working on famiclone
Post by: EmperorOfTigers on January 31, 2019, 11:10 AM
Could just be the famiclone doesn't work with the EverDrive. Some famiclone are not designed well enough for it to work. You should try the EverDrive on original hardware if possible.