Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - keropi

Pages: [1] 2 3 ... 21
Sadly the original megaed v1 is not supported anymore, it's abandoned. It had supposedly so much potential with it's FPGA but nothing came out of it in the end ...

EverDrive N8 / Re: Everdrive N8 Famicom Disk System audio
« on: August 10, 2017, 12:51 AM »
oh wow... that's really bad

well that's sad news for obvious reasons since the original mega-ed was a premium cart ... but if it does not fit then nothing to do really

what about the original Mega-ED? is it supported?

FXPAK (SD2SNES) / Re: Firmware v0.1.7e released
« on: May 06, 2017, 01:35 PM »
thanks for the heads up!

Super EverDrive / Re: Super Everdrive China DSP1
« on: August 18, 2016, 02:50 PM »
do you seriously expect support for a clone cart? get a real one and be done with it.

What are you talking about? SD card speed is irrelevant, the SED reads from the SD *once* when it burns the game to the SED eeprom.
After that the game is running from the eeprom chip and not the SD... everdrives/consoles are not PCs mate.

The only situation where the SD card speed matters is with the SD2SNES when it is running MSU-1 games because the sd cards is accessed constantly to stream audio/video : this is something no normal game does.

You are having another kind of problem, most likely a hardware issue with your cart.

FXPAK (SD2SNES) / Re: SD2SNES Clock Problem
« on: May 06, 2016, 01:57 PM »
It's a known issue and happens with every SD2SNES , so don't worry about your hardware being faulty or something  ;)
I have no idea if it can be fixed or not, maybe ikari_01 replies here and tells us.

EverDrive 64 / Re: Giving Back;)
« on: April 09, 2016, 12:27 PM »
thanks for sharing!

That's the fate of old PSUs, they just die. It's irrelevant if you played NTSC roms or the ED64, for example an old (or crappy) pc psu can die while the pc is turned off and the psu operates in stand-by mode... get a replacement and cross your fingers the old psu did not damage the rest of the machine.

Mega EverDrive / Re: SEGA Master System FM audio...
« on: March 18, 2016, 12:11 PM »
on a western Master System a hommade device from Australia exists but for the moment no answer from there about this.

Off Topic / Re: Supercic Snes Mod
« on: March 07, 2016, 10:18 PM »
yep it seems you got them correct
here is a VERY helpful guide:
also check this site for more guides:

Off Topic / Re: Supercic Snes Mod
« on: March 07, 2016, 08:53 PM »
ofcourse, building your own is certainly doable and cheaper, that's what I did before all the fancy pcbs:

are you moddin a 1-CHIP or an older 3-CHIP snes?

Off Topic / Re: Supercic Snes Mod
« on: March 07, 2016, 08:31 PM »
bortie4938's boards is what I use as well, got them directly from him though... else you can get all the parts needed to make your own from Bad_Ad84:

bortie4938's work is available here, there are links in the projects that lead to OSHPARK for pcb orders: and

and here are the pcbs:

Off Topic / Re: Supercic Snes Mod
« on: March 07, 2016, 08:10 PM »
You only need the .hex file to programm the PIC , the .asm is the source code that when compiled produces the .hex file
It is a good idea to open the .asm with notepad for example, there are instructions in there - it's just a text file.

Pages: [1] 2 3 ... 21