EverDrive Forum

General => FXPAK (SD2SNES) => Topic started by: mccarseat on April 21, 2021, 05:38 PM

Title: FXPAK Pro, Super NT, 8bitdo receiver. Won't boot with receiver plugged in.
Post by: mccarseat on April 21, 2021, 05:38 PM
So I got an FXPak Pro recently, works great in my Super NT, but if I want to use my 8bitdo wireless controller, I can't boot it with the receiver plugged in.

I have to unplug the receiver, boot the console, THEN plug the receiver in. Otherwise it won't boot at all. Of course, zero issues with wired controllers.

I contacted Analogue, they told me to make sure I had the newest firmware on console, and the cart, which I do.

As an interesting side note, my friend has an older SD2SNES and that works just fine with the controller receiver plugged in for boot up.

EDIT: I tried changing the boot timing from 0-10 and anything in between, boot to cart, boot to menu, boot logo etc. I also verified, the console, controller, receiver, and cart are all on the newest firmwares.
Title: Re: FXPAK Pro, Super NT, 8bitdo receiver. Won't boot with receiver plugged in.
Post by: emuman100 on May 07, 2021, 05:12 AM
Use a real SNES and you won't have any problems.