Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - Sarge

Pages: [1] 2 3 ... 24
EverDrive N8 / Re: OS 2.11 mapper glitches on japanese titles?
« on: April 14, 2021, 06:30 AM »
Glad that ended up being it - I've definitely seen some odd behavior like that before, both with PAL on NTSC and NTSC on PAL.

EverDrive N8 / Re: OS 2.11 mapper glitches on japanese titles?
« on: April 14, 2021, 12:05 AM »
The first thing I'd suspect is using a PAL-region console. I'd try testing those ROMs in an accurate emulator and see if you see the same behavior at 50Hz with NTSC ROMs like that.

EverDrive N8 / Re: Not another Lagrange Point post
« on: February 28, 2021, 02:58 AM »
I ended up using a 47k resistor, myself. 56k is probably fine, too. You may want to consider a potentiometer if you want to try to dial in settings instead.

There are other solutions out there, too, including one that plugs into the expansion port on the bottom of the system, but I'm not sure it's available anymore.

EverDrive N8 / Re: Not another Lagrange Point post
« on: February 24, 2021, 01:25 AM »
As others have noted, is your system modified for expansion audio? If it's an unmodded US system, you won't get any of the expansion audio channels.

Also, on the original N8, the audio levels tend to be pretty low. You'll need to ramp up the presets on the VRC7, but I'm pretty sure you can't go all the way to 200% or it starts distorting.

Other than that, the game should work fine with the last release of the firmware.

EverDrive 64 / Re: Everdrive 64 question
« on: January 19, 2021, 08:24 AM »
Yes, is the legit website. It's what is linked from the main page for the EverDrive 64 2.5.

Turbo EverDrive / Re: Running the BIOS for the Super System CD Card
« on: January 19, 2021, 08:20 AM »
Look for the Turbo EverDrive pack on You should be able to find the patched BIOS in there.

Depends on if you want to run a lot of expanded hacks. If you're just interested in the default NES library, the original model is fine. That's what I'm still rocking. I do wish I could play Metal Slader Glory on real hardware, but it's not worth me shelling out more right now to upgrade.

That said, I'm sure the Pro is a very nice piece of hardware.

EverDrive 64 / Re: EverDrive 64 2.5 and Donkey Kong 64
« on: January 14, 2021, 12:43 AM »
I may check out that unoffical firmware.

And yep, definitely using the no-intro version. Was happy to see it's just a momentary problem - I'm sure once he rolls back around to it, the 3.X firmware will be excellent. (Seriously, KRIKzz is supporting so many carts!)

EverDrive 64 / EverDrive 64 2.5 and Donkey Kong 64
« on: January 13, 2021, 12:19 AM »
Hi, all, I was just testing out Donkey Kong 64 on my new ED64 2.5, and I get black-screen freezes when starting a new game (doesn't transition to intro). A reset will let you get in-game and past the intro, but entering Cranky's Hut will also freeze the game with a black screen. This is on OS 3.05, using both the No-Intro ROM and the confirmed good GoodN64 ROM (both same CRC).

On a whim, I dropped back to 2.13, and it seems to be working just fine. So I'm guessing something isn't quite right in the current OS version.

EverDrive N8 / Re: EverDrive-N8 PRO bug reports.
« on: January 10, 2021, 06:03 PM »
I would assume some sort of conversion to MMC5 might work. Not sure about other mappers, but MMC5 allows 1024KB PRG. Probably a lot of work getting the IRQs right, though.

EverDrive N8 / Re: Guerrilla War (USA) not working on N8 and N8 Pro
« on: December 18, 2020, 07:03 AM »
It seems to be working fine for me on a US frontloader and original N8 on the latest firmware. What's the CRC of your ROM? The one I'm using is 6DECD886.

Are we talking the US, NTSC version of ActRaiser 2? No freezing as far as I can tell on my US 2/1/2 SNES on an older SD2SNES (Rev. F I think) and the FuRIOUS firmware.

Turbo EverDrive / Re: Firmware ?
« on: December 07, 2020, 04:31 AM »
You can run Elmer's with the official one. Elmer's definitely has some advantageous.
Yeah, elmer had recommended not to make his firmware the default one, although I don't know if anything has changed on that front. Being cautious more than anything. So install the normal TBED firmware and use elmer's from there if you need it. I recommend it for backing up your save data!

Off Topic / Re: My misconceptions about everdrives
« on: December 06, 2020, 10:53 PM »
Yeah, my understanding is that the Warrior 64 is just a re-shelled N64 with a LevelHike cable attached to the RGB output. Not great.

Pages: [1] 2 3 ... 24