Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Makinx

Pages: [1]
1
FXPAK (SD2SNES) / Re: SD2SNES speed vs original cartridge
« on: April 17, 2019, 01:31 AM »
The sd2snes should behave exactly like a real cartridge. It is commonly accepted for speedruns for this reason.

2
FXPAK (SD2SNES) / Re: SD2SNES PRO Video Problems
« on: April 16, 2019, 06:38 PM »
Maybe it's a problem with the sd card that you are using. Have you tried another sd card? Have you tried formatting the sd card to see if that helps?

3
FXPAK (SD2SNES) / Re: Buying my first SD2SNES
« on: July 27, 2017, 05:18 PM »
Alternatively, you can order a SD2SNES from a UK dealer. They ship to the Netherlands real fast. It'll take a bit longer if you order it from Krikzz (about 2 weeks).

Great that you managed to get a hold of a 1-chip SNES. I would mod the SNES for 60hz output to fully enjoy the games without them running slower and letterboxed. But that's up to you of course. :)

4
Anyone else notice that the Music volume is WAY WAY too high for this patch?  It's so bad that the sound effects are barely audible.  I really can't enjoy it like this.... the next firmware for the SD2SNES desparately needs an option to reduce the MSU volume.  I see there is an option to increase it, although I can't imagine anyone wanting to increase it when it's already ungodly loud....

You are using the wrong pcm files. Because on older revisions of the SD2SNES the MSU volume was too low, the audio of the pcm files was boosted to compensate. Now that the SD2SNES plays MSU audio at the right volume, the boosted files sound way too loud. You need the unboosted pcm files for normal audio.

5
Off Topic / Re: Nes NTSC/PAL speed
« on: February 19, 2017, 02:28 AM »
Pretty much every console I bought from the 16-bit consoles all the way up to the Xbox360, came with an RCA to scart adapter. So if you're like me and have bought a lot of consoles, you should have plenty of those lying around.

An NTSC NES will work with your power supply. A Famicom will not, as it requires DC and not the AC your psu provides.

6
Off Topic / Re: Nes NTSC/PAL speed
« on: February 18, 2017, 10:40 PM »
Your television accepts NTSC signals through its Scart ports. The "50Hz" mentioned on the back sticker refers to the mains frequency and has nothing to do with 50/60 Hz refresh rates.

7
FXPAK (SD2SNES) / Re: SD2SNES + 50/60 Hz modded PAL console
« on: February 17, 2017, 04:41 PM »
I don't see why he shouldn't mod his console, other than perhaps the chance of destroying the console through incompetence. It's a 50 cent mod compared to something between 50-100 dollars/euros for a Super Famicom off of Ebay.

To answer the TC's question: SD2SNES will run the games at 60hz if your PAL SNES is modded as such.

8
Shop and Shipping / Re: Shipping to Canada
« on: February 13, 2017, 06:27 PM »
A month isn't unusual. I wouldn't worry about it just yet.

It took exactly 2 weeks for my package to arrive, from Eastern Europe to The Netherlands. Yours has to cross the Atlantic as well.

Hope you get it before moving!

9
FXPAK (SD2SNES) / Re: Sd2snes and SFC supercic
« on: February 09, 2017, 02:01 PM »
If you also have a Mega Drive, you could use that PSU for the SFC.

Alternatively, you could mod your pal SNES to output 60hz and achieve the same result. Would have been cheaper than buying an SFC anyway ;-).

Pages: [1]