Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - themechanicalkoopa

Pages: [1] 2
1
FXPAK (SD2SNES) / Re: SD2SNES Pro (fxpakpro) video issues
« on: June 27, 2020, 08:38 PM »
yeah that's what happened to mine. the peg broke off at some point. like I didn't even know it broke. it just wasn't there anymore lol. luckily I never used my 1chip console very much at all so it should last me a little while (knocks on wood) btw PCastro, are those back plates easy to replace? or do they require soldering? also what's the word on the super famicom system and it's internals? I doubt they're any better or worse after learning the ropes of the snes NTSC consoles a bit the past couple days. Just curious if it's even worth looking into getting one. let alone if they even had 1chip revisions at all.

2
FXPAK (SD2SNES) / Re: SD2SNES Pro (fxpakpro) video issues
« on: June 27, 2020, 10:31 AM »
yo jdurg!!! right on! I didn't even know that! That's awesome! and so good to know! I was so glad I was able to get things swapped out and can't wait to see what I can find for replacement parts. hopefully I can get that taken care of at some point soon. might even have someone check the caps for me as well. bring this baby back to life again :) I'm just surprised I was able to make things happen today when I did. and now everything works as it should. Now if I can just figure out how to make the save states work lol. I heard there's firmware for it that gives u like 5 saves locally with the sd2snes but I want to use my pc and utilize the sd2snes to it's full potential :)

3
FXPAK (SD2SNES) / Re: SD2SNES Pro (fxpakpro) video issues
« on: June 27, 2020, 08:49 AM »
I forgot to add the photo of the broken shell lol

4
FXPAK (SD2SNES) / Re: SD2SNES Pro (fxpakpro) video issues
« on: June 27, 2020, 08:47 AM »
Just did about a 3hr stream with it and tested several games using the fxpakpro and it works great. I am so relieved to say the least! But yeah I'm gonna have to source a new shell for the other board and get it back into working shape. Also its one of the original release consoles I think. the sound chip is dated 1990 and is detachable. also the rear DC port on it the plastic peg was broken off and you can only see two itty bitty pins on it sticking where that plastic peg should be to support the plug in to the back of the console. not sure if this contributed to the problem but either way I'll send it to a friend of mine who does repairs and see if he can sourse a few items for it and bring it back to good working order to keep as a back up if need be. but it's a good thing I kept that 1 chip console. It took a hit some time ago when it hit the floor during a large quake we had here in southern california. we shake pretty good here. Like the shell was so bad the controller ports broke off and ruined the ribbon cable for it. Then my original console controller ports just quit on me and I robbed the controller ports from the 1chip board and swapped them over. thankfully I saved it cause it just saved my life today! Took a little modifying of the UN1 shell to fit the 1chip board into it but I made it work perfectly :) and I am back in business! As u can see the shell for the 1 chip was pretty beat up but just thankful I still had it. I hope this board can be repaired.

5
FXPAK (SD2SNES) / Re: SD2SNES Pro (fxpakpro) video issues
« on: June 27, 2020, 04:54 AM »
yea Greg2600 I have noticed instances from other fellow streamers of their consoles doing weird things after long hours of speedruns and such. Like I am really surprised that things have held up over the years as they have. Luckily this 1chip board I have hasn't seem much use at all! I am just glad I was able to swap it into this other decent shell I own. The swap took a little tweaking of the shell to get it to fit but was a simple modification. I got it all together working like it should now. Oh and I noticed my original console has the white lettering on the eject button. Interesting piece of info for sure! The eject button from my 1 chip console is casted into the eject button itself. the letters are raised up. I'll definitely have to remember this info for later down the road if I ever go to dig into these systems a bit more. Thanks for the info. Much appreciated :)

Koopa

6
FXPAK (SD2SNES) / Re: SD2SNES Pro (fxpakpro) video issues
« on: June 27, 2020, 04:25 AM »
UPDATE: So I decided to take the plunge. I remembered I had an older SNES in my storage shed that had a broken shell due to an earthquake we had few years ago where it fell off my dresser and hit the tile floor and broke. It was a 1chip board! and I swapped the board out to my current snes shell and the SD2SNES works as it should. So chances are it was the console that was the issue. possibly a power issue or something else causing the glitches. so thankfully my 2hrs worth of tinkering with this has paid off! And I am back in business! Thank you everyone for all the help and suggestions! I may just keep the power supply I bought as a back up just in case so I wont look at that as a wasted purchase. but I did want to thank everyone for their input and suggestions. I was able to make everything work as they should. Can't wait to dig in and start learning randomizers :)

Koopa

7
FXPAK (SD2SNES) / Re: SD2SNES Pro (fxpakpro) video issues
« on: June 27, 2020, 01:17 AM »
MY SNES has a serial number starting with UN11 not sure how to accurately date it though. but it would be nice to know when it was made. Like I am half tempted to try and source another snes online on ebay or something but then it'd still be taking a big risk if the caps on that one being listed is even good or not. so kind of at an impass here on what I should do (IF) the power supply I bought doesn't remedy the problem.

8
FXPAK (SD2SNES) / Re: SD2SNES Pro (fxpakpro) video issues
« on: June 26, 2020, 10:43 PM »
it kinda acts like that however it only glitches out on me after I load a game. I posted a video link of what happens in a previous reply earlier in this thread. I'll post the link here so u can see exactly what happens. I was told it could be a bad power supply so I ordered one with the hopes that this would remedy the problem I am experiencing. I have been in touch with stoneagegamer and they got back to me right away saying to try the power supply option as well. yet if it still didn't work they said they would have me mail it back so they can test it on their end and replace it if need be.

https://youtu.be/_TY_ONR3OEw

^^^ here is the video I made last night.

9
FXPAK (SD2SNES) / Re: SD2SNES Pro (fxpakpro) video issues
« on: June 26, 2020, 09:19 AM »
yes this is my first one I've ever gotten. I still have yet to even get it to work. I ordered another power supply to see if that will fix the problem and then will see what happens after that. but at this point not sure what to do.

10
FXPAK (SD2SNES) / Re: SD2SNES Pro (fxpakpro) video issues
« on: June 26, 2020, 03:04 AM »
yeah I must not be doing something right. I can't get it to even work properly. it keeps crashing it.

11
FXPAK (SD2SNES) / Re: SD2SNES Pro (fxpakpro) video issues
« on: June 26, 2020, 02:59 AM »
I tried replacing it with the original sd2snes folder and I got a red screen followed by a screen of moving red and yellow bars then a solid green screen and the sd2snes light just blinks green on the face of the cart, the top two lights blinked a couple times before this  but then now it's just the green blinky light on the face and still a solid green screen.

12
FXPAK (SD2SNES) / Re: SD2SNES Pro (fxpakpro) video issues
« on: June 26, 2020, 02:54 AM »
I dont think I did it right. I just get a blank screen :( define root? do I put that file you set by itself? or do I drop it in the original sd2snes folder?

13
FXPAK (SD2SNES) / Re: SD2SNES Pro (fxpakpro) video issues
« on: June 26, 2020, 02:46 AM »
okay I'll do that now and post the results in a moment. thank you so much.

14
FXPAK (SD2SNES) / Re: SD2SNES Pro (fxpakpro) video issues
« on: June 26, 2020, 02:24 AM »
do I just put that file on the sd2snes and run it as if I were to run any ol rom? or is there a stepped process to make sure I do the diagnostic properly?

thank u for the help.

15
FXPAK (SD2SNES) / Re: SD2SNES Pro (fxpakpro) video issues
« on: June 26, 2020, 12:41 AM »
I tried updating the firmware from krikzz's site and it still does the same thing. I really am stumped along with feeling a bit disappointed. I hope someone has a fix for this. or any suggestions at all. here's a video link of what it does. hoping for the best. https://youtu.be/_TY_ONR3OEw

Pages: [1] 2