Author Topic: FXPAK Pro, Super NT, 8bitdo receiver. Won't boot with receiver plugged in.  (Read 901 times)

0 Members and 1 Guest are viewing this topic.

Offline mccarseat

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
    • View Profile
So I got an FXPak Pro recently, works great in my Super NT, but if I want to use my 8bitdo wireless controller, I can't boot it with the receiver plugged in.

I have to unplug the receiver, boot the console, THEN plug the receiver in. Otherwise it won't boot at all. Of course, zero issues with wired controllers.

I contacted Analogue, they told me to make sure I had the newest firmware on console, and the cart, which I do.

As an interesting side note, my friend has an older SD2SNES and that works just fine with the controller receiver plugged in for boot up.

EDIT: I tried changing the boot timing from 0-10 and anything in between, boot to cart, boot to menu, boot logo etc. I also verified, the console, controller, receiver, and cart are all on the newest firmwares.
« Last Edit: April 21, 2021, 06:29 PM by mccarseat »

Offline emuman100

  • Newbie
  • *
  • Posts: 19
  • Karma: +0/-0
    • View Profile
Use a real SNES and you won't have any problems.