Author Topic: FX PAK Pro broken?  (Read 830 times)

0 Members and 1 Guest are viewing this topic.

Offline daly

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
    • View Profile
FX PAK Pro broken?
« on: May 10, 2021, 06:27 PM »
I recently purchased a Super NT and the FXPAK PRO from everdrive.me. I can't get the sd2snes started. All i get is a black screen.
I have updated both to the latest firmware (SuperNt: v5.0 / FxPak: 1.10.3). I created a seperate folder (named roms) next to the sd2snes system folder in the root of the sd card and placed my roms there.

I already searched the forum for this problem and tried out:
- cleaned the contacts of cardridge and sd-cards
- used 4 different sd cards
- use older firmwares of SuperNt and FXPAK Pro
- boot directly to card ridge in combination with boot delays from 0 - 4 seconds
- changed speed of sd-card
- used pal and ntcs region
- removed controller before system start

I noticed that sometimes the red error led of the cardridge blinks 9 times.

I also executed the sd3snes diagnostic firmware which gave me this result:
Code: [Select]
===log opened===
flash check:   1d62b458-b82d6850-c2-01-1 
SD test... please insert card
=============================
crc1 = 8a0b9767 crc2 = 8a0b9767   PASSED


RTC Test
========
setting clock to 2019-02-23 00:00:00
2019-02-23 00:00:00
waiting 2 seconds
new time: 2019-02-23 00:00:02
PASSED


FPGA test
=========
configuring fpga...
basic communication test...FAILED




Does this mean i purchased a broken module? Thank you very much.

Offline nuu

  • Hero Member
  • *****
  • Posts: 2147
  • Karma: +91/-2
    • View Profile
Re: FX PAK Pro broken?
« Reply #1 on: May 11, 2021, 01:11 PM »
Possibly, I think you should contact the seller.

Offline Sid

  • Administrator
  • Newbie
  • *****
  • Posts: 20
  • Karma: +2/-0
    • View Profile
Re: FX PAK Pro broken?
« Reply #2 on: May 13, 2021, 06:22 PM »
Send PM
EverDrive support team