Author Topic: Clarification: Save States on the FXPak Pro  (Read 3935 times)

0 Members and 1 Guest are viewing this topic.

Offline zombi

  • Newbie
  • *
  • Posts: 5
  • Karma: +0/-0
    • View Profile
Clarification: Save States on the FXPak Pro
« on: August 27, 2020, 05:01 AM »
Hello all,

I apologize for the noobish question, but I'm seeing conflicting information here and there.

Are Save States available on the FXPak Pro? If so, which firmware/update is needed?

Thanks.

Offline zaphro72

  • Full Member
  • ***
  • Posts: 204
  • Karma: +8/-0
    • View Profile
Re: Clarification: Save States on the FXPak Pro
« Reply #1 on: August 27, 2020, 06:55 AM »
They are not supported by an official firmware right now that I am aware of. I think there is an unofficial firmware with support for them but I am unsure.

Offline ErivandoXP

  • Jr. Member
  • **
  • Posts: 81
  • Karma: +8/-0
    • View Profile
Re: Clarification: Save States on the FXPak Pro
« Reply #2 on: August 27, 2020, 04:59 PM »
SD2SNES firmware 1.10.3-frs-v11 (Unofficial) by FURiOUS

https://github.com/furious/sd2snes/releases/tag/v1.10.3

Offline zombi

  • Newbie
  • *
  • Posts: 5
  • Karma: +0/-0
    • View Profile
Re: Clarification: Save States on the FXPak Pro
« Reply #3 on: August 28, 2020, 05:24 AM »

Offline airangel

  • Newbie
  • *
  • Posts: 2
  • Karma: +0/-0
    • View Profile
Re: Clarification: Save States on the FXPak Pro
« Reply #4 on: September 22, 2020, 07:42 PM »
Did this work for you? I downloaded the software and it says the sd2snes / m3nu.bin was not found. Is there anything else I need to download for it to work?

Offline Relikk

  • Sr. Member
  • ****
  • Posts: 406
  • Karma: +35/-8
    • View Profile
Re: Clarification: Save States on the FXPak Pro
« Reply #5 on: September 22, 2020, 11:32 PM »
Did this work for you? I downloaded the software and it says the sd2snes / m3nu.bin was not found. Is there anything else I need to download for it to work?

Is your SD card FAT32 formatted? Do you have a folder on the root of your card called "SD2SNES" with the firmware files inside it (m3nu.bin etc.)?

This is the latest release, also: https://github.com/furious/sd2snes/releases/tag/savestate_v12

Offline airangel

  • Newbie
  • *
  • Posts: 2
  • Karma: +0/-0
    • View Profile
Re: Clarification: Save States on the FXPak Pro
« Reply #6 on: September 22, 2020, 11:40 PM »
I ended up getting the newest release, but unfortunately it won't work. It's based off the 1.10.3 firmware and my FxPak Pro doesnt run 1.10.3 properly, there are just flickering lines all over. So I have to use 1.10.1, so I won't be able to use this. Going to talk to Krikzz about a replacement because it doesn't work on the newest firmware.