Author Topic: Mega EverDrive Pro - Rolling Colour Bars / No Signal  (Read 475 times)

0 Members and 1 Guest are viewing this topic.

Offline rgsaustralia

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
    • View Profile
Mega EverDrive Pro - Rolling Colour Bars / No Signal
« on: May 13, 2021, 06:58 AM »
It was working great for a few days, but last night the Mega drive started showing some rolling bars while playing a game (Castlevania Bloodlines) ...

I switched the MD off and it continued to show the rolling color bars. I tried some other games and it worked fine.

Now when I try to turn the MD on with the MEDP in it , it basically doesn't show a signal at all.

This is on a Model 1 PAL Asian MD.

Here's a video showing the issue: https://youtu.be/AGhwqArWlIc

Does anyone know what the issue is?

Offline supersign

  • Sr. Member
  • ****
  • Posts: 291
  • Karma: +25/-0
    • View Profile
Re: Mega EverDrive Pro - Rolling Colour Bars / No Signal
« Reply #1 on: May 15, 2021, 03:20 PM »
What revision board is it? From my understanding, some boards don't get along with the Pro. I wonder if your MD is a Japanese one which is poorly modded for 50hz and it's causing a side-effect with the Pro.* If I were you, I would try to restore it back to 60hz to see if that fixes it. The PRO could also be defective. Here's some suggestions:
  • Try another PSU
  • Check Diagnostics if possible
  • Try another MD

*Correct me if I'm wrong on this.
« Last Edit: May 15, 2021, 03:42 PM by supersign »

Offline jerrymh

  • Newbie
  • *
  • Posts: 4
  • Karma: +0/-0
    • View Profile
Re: Mega EverDrive Pro - Rolling Colour Bars / No Signal
« Reply #2 on: May 16, 2021, 04:35 AM »
Mine stops working on the micro SD lock (7 dias works fine),  the card not stays locked.  I am disappointed that I bought the MED pro