EverDrive Forum

General => Off Topic => EverDrive MD => Topic started by: xrider on January 31, 2018, 08:31 PM

Title: I looking for latest firmware (.pof) for my old Everdrive V2
Post by: xrider on January 31, 2018, 08:31 PM
Hello everybody,

I looking for the latest firmware for my official Everdrive V2.
I have bought the "USB BLaster" for update it...

On my pcb it's write : REV 2.5 23.03.2011

What is it the latest firmware and latest OS for my Everdrive please ?

See my picture :

(http://cyberscooter.free.fr/everdrive/IMG_2112.JPG)
(http://cyberscooter.free.fr/everdrive/IMG_2111.JPG)
Title: Re: I looking for latest firmware (.pof) for my old Everdrive V2
Post by: Assman on February 01, 2018, 03:33 AM
I assume what you're looking for is here:

http://krikzz.com/pub/support/ed-xx-r2 (http://krikzz.com/pub/support/ed-xx-r2)
Title: Re: I looking for latest firmware (.pof) for my old Everdrive V2
Post by: xrider on February 01, 2018, 08:40 AM
No, i looking for the *.pof file for the Altera chip (CPLD).
I d'ont have find the *.pof in download section
Title: Re: I looking for latest firmware (.pof) for my old Everdrive V2
Post by: xrider on February 01, 2018, 06:56 PM
UP please
Title: Re: I looking for latest firmware (.pof) for my old Everdrive V2
Post by: Marteicos on February 01, 2018, 09:52 PM
Latest os for Everdrive MD is v36

Latest firmware is 11 or 12.
Title: Re: I looking for latest firmware (.pof) for my old Everdrive V2
Post by: Foxraed on June 19, 2018, 10:14 AM
I was looking for it too old.
Title: Re: I looking for latest firmware (.pof) for my old Everdrive V2
Post by: decommand on January 21, 2019, 05:57 PM
everdrive md v2 firmware is not for public.
you can not update firmware.
Title: Re: I looking for latest firmware (.pof) for my old Everdrive V2
Post by: Zezo85 on September 22, 2019, 02:21 PM
im also need this file
Title: Re: I looking for latest firmware (.pof) for my old Everdrive V2
Post by: Link83 on September 22, 2019, 03:02 PM
AFAIK EverDrive-MD "REV 2.5" should come with firmware v13, which I believe is the last firmware released for the ED-MD v2.x range.

If you had an EverDrive-MD with PCB REV 2.0 -> REV 2.3 then the last firmware was v12, but PCB REV 2.4 -> REV 2.6 came with firmware v13 preinstalled to support the megakey function. To my knowledge there wasn't any further firmware updates for the EverDrive-MD 2.x range.

The last OS was v36 released in October 2012, which is still available for download here:-
http://krikzz.com/pub/support/everdrive-md/v2/os-bin/