Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - zaphro72

Pages: [1] 2 3 ... 14
1
Super EverDrive / Re: Super everdrive X6
« on: June 24, 2021, 06:17 PM »
Hi guys,

im new here (hi everyone  :))

I am completely new to everdrives but have just bought the x6 as its seems entry level and a good way to see if i want to go all out on the FXPAK PRO down the line.

anyway, i've set up the everdrive but i have a question. in order to use the extra chip support, do you have to manually add the bios yourself?

i apologise if this is an obvious question or its been asked a tonne of times already!

thanks :)

If it works similar to the old versions yes you need to add the different bios for the chips yourself.

2
EverDrive GB / Re: Problems with New Everdrive X7 (Everdrive.ME)
« on: June 10, 2021, 05:25 PM »
Having a bit of a canoodle. It either says "no FAT" or it says "GBSYS" not detected". When I tried to load it using the oldest iteration of the SYS file and putting nothing else on it, it was stuck in Loading. When I put game files on it, it displayed F6 Fat Not Found again. Not sure what I can do. Only have the one SD card, and it works fine with everything else that I own. Any suggestions?

What size of SD card are you using? Is it formatted to FAT32?

3
EverDrive GB / Re: X7 - Cart button doesn't work very often
« on: June 09, 2021, 01:49 AM »
"Boarder" kept bothering me to.

Anyway Richarddragon, the switch isn't hidden by the label, it's inside the plastic shell on the X-series of the EDGB. If you don't have the X-series there is no switch to press. No one ever said anything about any labels except you. You keep ignoring half of what people say and makes up your own version of that half. You should learn to "read from the book".

I likely have both the X series and the older one, If one is transparent and one is black then yeah that's likely the way to tell which version is which as for border being misspelled as boarder the spell checker has no red line when you type in "Boarder" just try it in the message and it doesn't refer it as incorrectly spelt... it's kind of like how I usually say releace instead of release of course the latter name has a red line under it so I right click and change it to the correct word.

That's because "boarder" and "border" are both real words but with significantly different meanings.

4
EverDrive GB / Re: X7 - Cart button doesn't work very often
« on: June 02, 2021, 04:51 PM »


All variations of SNES/SFC had a cartridge lock.
The US carts did indeed have a different lock slot, it's sloping and designed to slide the lock backward and switch the power off if you are dumb enough to pull the cart out without powering down first.
Does the NA SNES lock even work with the NA carts that doesn't have a horizontal slit in front?
[/quote]

Not really, from what I have read the ramp design of the cart allows the SNES lock to go out and then if someone tries to pull the cartridge out the ramp pushes the lock back, effectively shutting off the SNES

5
EverDrive GB / Re: X7 - Cart button doesn't work very often
« on: May 31, 2021, 05:30 PM »
I've never seen a PAL or Japanese SNES without the cartridge lock, but maybe they do exist, or someone have removed it from yours. I don't know about the American SNES as I've never seen one in person and they have a different cartridge case. You see the long slit in front of Japanese/PAL cartridges? That's where it goes in to lock it in place when you switch on the power. You can disconnect the AC adapter from your SNES and look into the cartridge slot as you slide on the power switch on and you should see a plastic thing sliding in together with the switch if the locking is there.

I used to think the eject button was the only way to pull out a cartridge, but it's a separate mechanism from the lock mechanism.

They actually changed the NA cart design at one point. I think it was because too many people were trying to pull the cartridge out without using the eject button.

6
I was wanting to put my request in for the Mega ED to have more robust options for all of the consoles it supports.

Currently Mega Everdrive supports the most robust feature set such as for the Mega Drive such save states and cheats but they only work for the Mega Drive
They should also be developed for the other consoles the cart supports such as the 32x, Master System and Sega CD

Can we expect such features in future?

32x I think Krikzz said was impossible. I thought Master System save states and ingame menu were implemented on the Pro and then Sega CD I thought Krikzz indicated it might be possible in the future, but I might be wrong.

7
Short answer No

Hyperkin Retron 5 / Retron sq are Emulator

Shouldn't the Ezflash Definitive edition work since it will act like a retail cart?

Well that is assuming you have something to set the game on it I guess.

8
Mega EverDrive / Re: Mega EverDrive Pro - ERROR:05
« on: April 24, 2021, 06:04 PM »
I would also use exFAT for the formatting of the SD card as it appears to work better with CD games then FAT32

9
WOO BEBE it does!!! Not let me change BIOS but far much better

..I'm going to be the only one getting the Pro only to have SMS states xP and to have secondary setup since 32x outrights damns SMS compatibility unfortunate, n try me first M1 Genesis

It is well document and very upfront that SMS will not work when a 32x is attached.

I actually went with two different setups so I didn't have to remove my 32x....although I will admit I don't play much 32x

10
Hello guys!

I just started using my Mega Everdrive X7, after preparing it and getting the latest firmware from there : http://krikzz.com/pub/support/mega-everdrive/x3x5x7/OS/

I have a North American Genesis model 1 (HD).

I tried some games, and everything work except accessing the in-game menu by pressing start and down, according to the manual. I had a look at the option it is enable. I also did a diagnostic and everything is okay. So I don't understand why it is not working. I tried Genesis games as well as SMS.

I did some research but could not find a thread that would help me.

Any idea?

Thank you very much for your time!

You aren't running through a 32x are you? I know the 32x will stop in game menus

11
I was hoping krikzz.com would also be good place

He is just far more active on his twitter.

12
byuu makes himself hard to contact, for sure. Hopefully krikzz will drop in soon though.

If you want to get a response from Krikzz his Twitter is your best place

13
sound like "another" everdrive device also does not support max rom size :(

Stone Age Gamer is an official Krikzz dealer so it should be a legitimate Everdrive

14
How has this thread not been pinned yet?

15
Super EverDrive / Re: Super Everdrive X6??
« on: April 01, 2021, 05:55 PM »
Thanks for the correction on Super Mario RPG being SA-1.

Pages: [1] 2 3 ... 14