Author Topic: sd2snes time/date prompt after shutdown (troubleshooting included)  (Read 432 times)

0 Members and 1 Guest are viewing this topic.

Offline abyssea

  • Newbie
  • *
  • Posts: 5
  • Karma: +0/-0
    • View Profile
At first I figured it was just the battery, so I replaced the battery and still not keeping the time and date after turning off the unit.
Tried a different memory card.
Tried a different cr2032 (another brand also).
Tried a different firmware revision.
Desoldered and resoldered the battery holder, upon inspection saw nothing wrong with it.
Also reflowed the IC chip at the bottom, just for good measure.

I have rev h.
Also the log file from the diagnostic is included.

The RTC works, just the device won't retain the time and date once power and turn off.

Nothing looks wrong with the board, can't find any bridging. And the diag came back clean.