EverDrive Forum

General => EverDrive 64 => Topic started by: beccio on October 24, 2018, 10:51 AM

Title: Frequency not accepted into everdrive menu
Post by: beccio on October 24, 2018, 10:51 AM
Ho to all, i’ve a everdrive 2.5 with latest firmware. My n64 pal is modded with a RGB dac. I’ve found a sony pvm 1440qm (really better then a normal crt tv). My problem is the frequency dont accepted when i’m into the rom list menu. The games load correctly without issues. Is possible do something to fix this problem? The console is connected via pal scart rgb. Thanks!
Title: Re: Frequency not accepted into everdrive menu
Post by: dreimer on October 24, 2018, 05:27 PM
Do PAL AND NTSC games work fine from menu?
Title: Re: Frequency not accepted into everdrive menu
Post by: Barawer on October 25, 2018, 06:00 PM
I actually have a problem with the menu as well, i have an RGB modded console as well and the menu shakes quite a lot in my crt. games work fine. maybe the menu outputs in a weird way?
Title: Re: Frequency not accepted into everdrive menu
Post by: D4v3WTF on October 25, 2018, 08:23 PM
Hey, I had the same problems. There are two solutions for the problem. 1. Lower the ED64 menu resolution in the options. 2. Mod your RGB N64 to output CSYNC.

I’ve done the second one. With the CSYNC mod done, you’ll get a better image, the check board pattern and the menu jumping/flashing is gone.

Greetings
Title: Re: Frequency not accepted into everdrive menu
Post by: Barawer on October 25, 2018, 09:11 PM
Hey, I had the same problems. There are two solutions for the problem. 1. Lower the ED64 menu resolution in the options. 2. Mod your RGB N64 to output CSYNC.

I’ve done the second one. With the CSYNC mod done, you’ll get a better image, the check board pattern and the menu jumping/flashing is gone.

Greetings
Do you have a guide to the mod that you can send? it seems csync would be the best (i hate the checker board on screen!) even if it doesnt help :P
Title: Re: Frequency not accepted into everdrive menu
Post by: D4v3WTF on October 28, 2018, 10:35 AM
Hi, I’ll try to take some pictures of my N64 later today. My N64 is a france PAL console with the SMD mod and an official Nintendo SNES RGB cable. I don’t know if the mod will work on other N64 console.
Title: Re: Frequency not accepted into everdrive menu
Post by: Barawer on November 04, 2018, 01:33 AM
Hi, I’ll try to take some pictures of my N64 later today. My N64 is a france PAL console with the SMD mod and an official Nintendo SNES RGB cable. I don’t know if the mod will work on other N64 console.
Hey, i did a csync mod and while it seems to make the jumping a little better it did not fix it :( at least i got rid of the checkerboard pattern!
Thank you anyway!