EverDrive Forum

General => FXPAK (SD2SNES) => Topic started by: James-F on March 01, 2019, 08:38 AM

Title: Firmware v1.10.0 + 1.10.1 are out.
Post by: James-F on March 01, 2019, 08:38 AM
https://sd2snes.de/blog/downloads

Quote
v1.10.0
=======
 * add S-DD1 support by magno
 * initial firmware release for sd2snes Mk.III ("sd2snes pro")
 * fixes:
   - fix memory corruption on BS-X loading
   - reset S-RTC read state on all load and reset occasions

Quote
v1.10.1
=======
 * fix bug preventing boot on sd2snes Mk.III...
Title: Re: Firmware v1.10.0 is out
Post by: fox1918 on March 01, 2019, 09:09 AM
firmware 1.10.0 with S-DD1 support sd2snes ?
Title: Re: Firmware v1.10.0 is out
Post by: fille1976 on March 01, 2019, 09:15 AM
The wait is begun for my sd2snes pro,its shipped a few days ago,hope it arrives next week.
In a year time we get all major chip games on our sd2snes,what a year it was.
Now we have the final of sdd1,thx for all guys that contribute to make this happen.
And yes fox,this firmware works also on sd2snes.
Title: Re: Firmware v1.10.0 is out
Post by: dreimer on March 01, 2019, 09:55 AM
Last one missing and POSSIBLE to make is: SPC7110 aka the one and only chip from Tengai Makyō Zero
But even now it's a monster of a flash cart!
Title: Re: Firmware v1.10.0 is out
Post by: archimage on March 01, 2019, 01:01 PM
Hello, the firmware 1.10 is out and Dragon Ball Z Hyper Dimension is still broken for my Revision F device how is this possible ? I have found a 1.09 firmware with SDD1 that works for me and still not this official one.
Title: Re: Firmware v1.10.0 is out
Post by: the_randomizer on March 01, 2019, 05:56 PM
firmware 1.10.0 with S-DD1 support sd2snes ?

It literally says it in the OP, so yes.
Title: Re: Firmware v1.10.0 is out
Post by: Eyedunno on March 01, 2019, 06:09 PM
firmware 1.10.0 with S-DD1 support sd2snes ?

It literally says it in the OP, so yes.
All I see in the OP is "initial firmware release for sd2snes Mk.III ("sd2snes pro")", so I wouldn't blame anybody for wondering if it will work with Mk.II too.
Title: Re: Firmware v1.10.0 is out
Post by: fille1976 on March 01, 2019, 06:27 PM
I just tested bsx,still 09 error here.
Its a pal snes chip 1 with super cic and igr.
Tested the unpatched versions of darius and actraiser.
Title: Re: Firmware v1.10.0 is out
Post by: Galron on March 01, 2019, 06:49 PM
So are they making the firmware compatible with both SD2SNES and the Pro? So that included package detects what you have?
Title: Re: Firmware v1.10.0 is out
Post by: FeverDrive on March 01, 2019, 07:04 PM
So are they making the firmware compatible with both SD2SNES and the Pro? So that included package detects what you have?

Yes.

Quote
Support for sd2snes Mk.III (a.k.a. SD2SNES Pro). This works by adding a new set of support files for the new hardware so the firmware package actually contains two firmwares. This also makes it possible to swap the same card between old and new sd2sneses freely.
Title: Re: Firmware v1.10.0 is out
Post by: Galron on March 01, 2019, 08:18 PM
So are they making the firmware compatible with both SD2SNES and the Pro? So that included package detects what you have?

Yes.

Quote
Support for sd2snes Mk.III (a.k.a. SD2SNES Pro). This works by adding a new set of support files for the new hardware so the firmware package actually contains two firmwares. This also makes it possible to swap the same card between old and new sd2sneses freely.


That's a great way to do it, makes it less confusing.
Title: Re: Firmware v1.10.0 is out
Post by: Relikk on March 01, 2019, 08:48 PM
So are they making the firmware compatible with both SD2SNES and the Pro? So that included package detects what you have?

I presume the .bi3 and the .im3 files are for the Pro.
Title: Re: Firmware v1.10.0 is out
Post by: the_randomizer on March 01, 2019, 10:33 PM
bsx error on  firmware 1.10.0

Super NT or Snes?  Specify.
Title: Re: Firmware v1.10.0 is out
Post by: Sceptre_JLRB on March 01, 2019, 10:58 PM
Thank you very much and congratulations for such an excellent work to Ikari, magno, RedGuy & everyone involved!

However, I’ve to report that BS-X compatibility is still not working to me. Whenever I try to run a SatellaView ROM from the BS-X interface, the game won’t never load and the Error 09 pops up. :(

Setting: SD2SNES Rev.F and Super Famicom.
Title: Re: Firmware v1.10.0 is out
Post by: josete2k on March 01, 2019, 11:58 PM
10.0.1 is out!!!

https://sd2snes.de/blog/downloads


Only related to PRO users...
Title: Re: Firmware v1.10.0 is out
Post by: Richardragon87 on March 02, 2019, 12:03 AM
Thank you very much and congratulations for such an excellent work to Ikari, magno, RedGuy & everyone involved!

However, I’ve to report that BS-X compatibility is still not working to me. Whenever I try to run a SatellaView ROM from the BS-X interface, the game won’t never load and the Error 09 pops up. :(

Setting: SD2SNES Rev.F and Super Famicom.

BS-X Compatibility works fine for me on 1.10.0 but the translated rom called "The Town Which Has No Name" still shows a black screen when it is selected and to be honest was any BS-X roms or mini games even translated on romhackings site except for the hub map?

And as before audio samples still break up when dialogue is spoken *Star Ocean I am looking at you*
Title: Re: Firmware v1.10.0 is out
Post by: fille1976 on March 02, 2019, 01:09 AM
I just tested bsx,still 09 error here.
Its a pal snes chip 1 with super cic and igr.
Tested the unpatched versions of darius and actraiser.

@fille1976 , question the BSX work with 1.8.0 firmware on snes ?


I did not try this now,but if i remember it worked then,its from v1.9 and up its not working anymore.
Even with v1.10.1 its not working,so something is still wrong.
Title: Re: Firmware v1.10.0 is out
Post by: Galron on March 02, 2019, 01:13 AM
I don't know if the bug affects all BSX stuff. I was able to get some of the modded Zelda roms to work, and also Radical Dreamers. But I don't have the newest version to test it.
Title: Re: Firmware v1.10.0 is out
Post by: fille1976 on March 02, 2019, 01:43 AM
The same problem as v20 os for n8,for some its working,for others not.
Strange,verry strange.
I just copied full sd2snes 1.10.1 on my sdcard as also all the other files,still error 09.
I give up,something is wrong,all other games are working,its just that bsx is not working.
Title: Re: Firmware v1.10.0 is out
Post by: Sceptre_JLRB on March 02, 2019, 01:44 AM
I just tested bsx,still 09 error here.
Its a pal snes chip 1 with super cic and igr.
Tested the unpatched versions of darius and actraiser.

@fille1976 , question the BSX work with 1.8.0 firmware on snes ?


I did not try this now,but if i remember it worked then,its from v1.9 and up its not working anymore.
Even with v1.10.1 its not working,so something is still wrong.

In my case, BS-X always worked until v0.1.7e on which it didn't work, then worked again on v1.8.0, and finally doesn't work any more on v1.9.0, v1.10.0 and v1.10.1.
Title: Re: Firmware v1.10.0 is out
Post by: fille1976 on March 02, 2019, 01:47 AM
The problem is probably by the firmware then,but why it s working for some other people.
Next week i get my sd2snes pro,maybe there its working on.
Title: Re: Firmware v1.10.0 is out
Post by: josete2k on March 02, 2019, 02:20 AM
I've tested F-Zero 2 (BS-X) with success.

1chip PAL with 75s08
SuperCIC
REV E -> REV H
English patched BS-X bios
Title: Re: Firmware v1.10.0 is out
Post by: felixbressart on March 02, 2019, 03:26 AM
Just got my sd2snes today, so forgive me if this is a silly question: is there an update of the beta firmware that added save states with the new features of v1.10? Would love to have save states on non-special chip games and the ability to play games that were added in 1.9 and 1.10...
Title: Re: Firmware v1.10.0 is out
Post by: sir_psycho_sexy on March 02, 2019, 03:29 AM
I just updated to the new firmware on my Rev H SD2SNES... so to start fresh I formatted my SD card, downloaded the new firmware, unzipped it and placed it on the SD card.

Next was the 6 .bin files from Stone Age Gamer. I notice on their website it says you don't require the BSXBios.bin, ST0010 or ST0011 any more as they are all built in to the latest firmware?

Can anyone confirm if this is accurate? There really isn't any formal instructions out there for us, except for Ikari's instructions here: https://sd2snes.de/blog/downloads (https://sd2snes.de/blog/downloads) which seem to indicate you do still need to manually insert the bsxbios.bin and st0010.bin

Thanks for your time
Title: Re: Firmware v1.10.0 is out
Post by: Relikk on March 02, 2019, 03:46 AM
If you have the files, put them on your SD card for the meantime. They won't do any harm if they aren't needed, and they take up very little space. Just until you get a definitive answer. If you don't have the files, you can try playing any games that use those chips and see if they work.
Title: Re: Firmware v1.10.0 is out
Post by: sir_psycho_sexy on March 02, 2019, 03:54 AM
Yes I still have the files, I saved a copy of the sd card before I formatted. I will try it out, thanks!
Title: Re: Firmware v1.10.0 is out
Post by: lee4 on March 02, 2019, 04:16 AM
For Pro users

Firmware 1.10.1
https://sd2snes.de/blog/archives/1058

changelog
This is an important update for SD2SNES Pro users since v1.10.0 doesn’t boot on it due to a silly bug. Sorry about that!
Title: Re: Firmware v1.10.0 is out
Post by: D4v3WTF on March 02, 2019, 01:18 PM
The same problem as v20 os for n8,for some its working,for others not.
Strange,verry strange.
I just copied full sd2snes 1.10.1 on my sdcard as also all the other files,still error 09.
I give up,something is wrong,all other games are working,its just that bsx is not working.

you use the firmware latest 1.10.1 on your old sd2snes ?

I’m using the 1.10.1 on my Rev. H without problems.
Title: Re: Firmware v1.10.0 + 1.10.1 are out.
Post by: CLE on March 04, 2019, 12:36 AM
About CX4, in addition to the problem in the CX4 speed options mentioned in the description, I have problems with the two versions of Rockman X2 Prototype made available last year.
In Magna Centipede stage, when the sub-boss "3D sword" appears, the game crash! Being necessary to turn the console off and on.
This problem has been fixed in BSNES Plus emulator.
Title: Re: Firmware v1.10.0 + 1.10.1 are out.
Post by: juicelink on March 25, 2019, 02:38 PM
I just receive my SD2SNES PRO, I put the firmware 1.10.1, And i'm disapointed !!! no save state options ! what about this major feature ?
Title: Re: Firmware v1.10.0 + 1.10.1 are out.
Post by: Relikk on March 25, 2019, 02:46 PM
It doesn't say anything about save states on the product page.
Title: Re: Firmware v1.10.0 + 1.10.1 are out.
Post by: Eyedunno on March 25, 2019, 08:21 PM
And this is the problem with the Russian telephone game where we go from a potential future update at some unknown date possibly a year or more in the future to a "major feature" of the unit to be expected at launch.

Maybe find out about features from official sources and not from randos on the Internet. (And yeah, I know ikari mentioned the savestate thing too, but it was as a possibility and clearly not something to expect right away.)
Title: Re: Firmware v1.10.0 + 1.10.1 are out.
Post by: juicelink on March 25, 2019, 09:04 PM
Ok so or I bought too fast or on item description it noticed save state (wip) and be removed.
any else it's buy...
But I have seen on the net the save state possibility with sd2snes classic firmware 1.8 + patch, we could think that the new sd2snes (called PRO) could be do save state (like almost all new Krikzz products X7).
I keep waiting about this update, I think it's major because many 40 years peoples plays old favourite games but it's diffult to found time to long gaming session.
Title: Re: Firmware v1.10.0 + 1.10.1 are out.
Post by: Relikk on March 25, 2019, 10:57 PM
But I have seen on the net the save state possibility with sd2snes classic firmware 1.8 + patch, we could think that the new sd2snes (called PRO) could be do save state (like almost all new Krikzz products X7).

This is the man you need to talk to, then...

http://furious.pro/

...he is the developer of the save states on SD2SNES. Ask him on Twitter.
Title: Re: Firmware v1.10.0 + 1.10.1 are out.
Post by: dace_blackheart on March 26, 2019, 02:45 AM
I just got SD2SNES Pro and everything seems fine, I tested most special chip games. All work fine except Star Ocean (SDD-1) gets a black screen. SFZero/Alpha 2 work fine.
My ROM is good, its the nointro ROM with CRC32 3DBDFDBF. Edit: My Console is a JPN SNS-CPU-RGB-01 2/1/3


Also, can Sufami Turbo support be added?
Title: Firmware v1.10.2 is coming
Post by: lee4 on March 28, 2019, 07:11 PM
Firmware v1.10.2 is coming

v1.10.2
=======
 * fixes:
   - [Pro] fix wrong data ROM size on uPD96050 core -> F1 ROC II track is shown
           properly.
   - [Pro] fix S-DD1 address mirroring -> Star Ocean works
   - [All] apply volume boost after FPGA reconfiguration
           (fixes MSU1 volume boost on Cx4, OBC1, SuperFX, SA-1, S-DD1)
   - [All] fix S-DD1 writes going to the wrong address on concurrent MCU
           accesses (saving not working in Star Ocean)
   - [All] avoid potential data corruption on MCU writes (e.g. SPC loading)

source:
https://github.com/mrehkopf/sd2snes/commit/214d36dd0bfc050a38fdfdf1bba17a95b715e478