EverDrive Forum

General => FXPAK (SD2SNES) => Topic started by: bnuttz on March 23, 2019, 08:39 PM

Title: Proper Brightness Limit Setting for 1 Chip SNES
Post by: bnuttz on March 23, 2019, 08:39 PM
I haven't been able to find much information about how this was implemented.  Is it appropriate to set the brightness limit setting to -1 if using a 1 Chip SNES?  Will that work equivalent to the 3 resistor brightness mod?  Any help would be appreciated.

Thanks