Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - ewok

Pages: [1] 2
1
FXPAK (SD2SNES) / Re: sa1 support [work in progress]
« on: August 19, 2018, 06:27 PM »
Thanks!

2
FXPAK (SD2SNES) / Re: sa1 support [work in progress]
« on: August 19, 2018, 11:38 AM »
Is v6 out?

3
FXPAK (SD2SNES) / Re: sa1 support [work in progress]
« on: August 05, 2018, 08:39 PM »
sa1 v03
----------
See first post for the link to the latest version: http://krikzz.com/forum/index.php?topic=8045.msg61986#msg61986

This update targets problems in certain Marvelous romhacks, golf games, and Pachi-Slot Monogatari. It may fix crashes or performance issues in other games but that is not confirmed.

Great! Thanks! I will test this update now....

4
FXPAK (SD2SNES) / Re: sa1 support [work in progress]
« on: August 05, 2018, 08:38 PM »
Hi,

Great job!! On an Analogue Super NT I cannot go directly to de sd2snes games list. Pushing the button combo gives a reset for SA1 games. Is this due to SA1 or the Analogue Super NT?

IGH are disabled for sa-1 games.

Thanks! And thanks for the other combo!

5
FXPAK (SD2SNES) / Re: sa1 support [work in progress]
« on: August 05, 2018, 01:51 PM »
Hi,

Great job!! On an Analogue Super NT I cannot go directly to de sd2snes games list. Pushing the button combo gives a reset for SA1 games. Is this due to SA1 or the Analogue Super NT?

6
News / Re: Joyzz Availalbe for order!
« on: August 05, 2018, 02:34 AM »
That’s what I like to know too. This is a little vague...... :-\

7
FXPAK (SD2SNES) / Re: gsu (superfx) support [work in progress]
« on: April 14, 2018, 11:14 AM »
Thanks a lot!!! Works great on my sd2snes and Analogue super NT. I sincerely hope that you also look to the other unemulated coprocessor chips.

To be quite honest, I understand sd2snes is a hobby project, but unfortunately firmware updates and emulated coprocessor updates are quite slow. And the device is quite expensive. I really like what you did in such a short time frame. Please stick to the sd2snes for a while. Your help is more then welcome! Thanks again!!  :)

8
News / Re: SMS OS v7-beta
« on: January 06, 2014, 09:42 PM »
Hi Krikkz,

I tried to upgrade via Other-OS and this time it worked fine. Thanks.

BTW: I had to push right on the gamepad while holding buttons I and II.

Ewok

9
News / Re: SMS OS v7-beta
« on: January 05, 2014, 10:26 PM »
Hi,

I upgraded to OS v7-beta on sms 1 with fat32 card. The upgrade went well, however I can not play any games anymore. When I load a game the system get stuk on WRITE. (one period) When I try to downgrade using a fat32 SD card to OS5 I get the message: 0xFB error

I can no use the card anymore? Please help.

Ewok

10
News / Re: My FPGA nes with EDN8
« on: December 31, 2013, 08:01 PM »
Write me down for the first batch!!!! Great work!

11
FXPAK (SD2SNES) / Re: SD2SNES issues (freezing)
« on: August 11, 2013, 02:42 PM »
after overwriting bsxbios.bin and cx4.bin firmwate 1.4a also works. 1.5 just keeps freezing. Hopefully we will see a newer firmware in the near future......

12
FXPAK (SD2SNES) / Re: SD2SNES issues (freezing)
« on: August 11, 2013, 02:21 PM »
It seems that downgrading to firmware 1.3 and below does the trick. What might be wrong with my cart because the newer firmware versions freeze the screen while browsing the games list?

I rather use 1.4a (or 1.5 for that matter) because of better compatibility with games :-(

13
FXPAK (SD2SNES) / Re: SD2SNES issues (freezing)
« on: August 11, 2013, 09:31 AM »
Hi,

Thanks for your help. I did not remove the tabs and use original Snes consoles. The cart is brand new (recieved it from Reyrogates 2 weeks ago). I hope Krikzz can help me.

14
FXPAK (SD2SNES) / Re: SD2SNES issues (freezing)
« on: August 09, 2013, 08:56 PM »
And other side in case....

15
FXPAK (SD2SNES) / Re: SD2SNES issues (freezing)
« on: August 09, 2013, 08:55 PM »
Hi Krikzz,

See image.....

Pages: [1] 2