Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - fille1976

Pages: [1] 2 3 ... 24
2
FXPAK (SD2SNES) / Re: SD2SNES ver.F to ver.H Mod Board upgrade
« on: April 28, 2020, 06:16 PM »
Or buy a MISTer,its the best thing i buyed in years,play neo geo-snes-nes-megadrive-sms-game gear-gba and gb-gbc-mega cd-pc engine-amiga-atari st-c64 ect...
Pc engine cd is almost here,and they are working on psx,but i think that will be next year,its really nice.
Sd2snes pro is good,it have a few more features,like the msu1 for sa1 games.
But after all i would spend money on MISTer then on sd2snes.

3
FXPAK (SD2SNES) / Re: SD2SNES ver.F to ver.H Mod Board upgrade
« on: April 28, 2020, 11:09 AM »
Get borti's board off,and clean everything up,then try the sd2snes again.
Then i should solder back the board in.
Or it must be broken or some shorts you,could be that if a short happenend it damage something.
I soldered also that board in,bust i sold my sd2snes for an sd2snes pro.
But i w ill try first without and get in back in.

4
Off Topic / Re: everdrive for GameCube?
« on: April 18, 2020, 12:12 PM »
I use a gcloader now,its fantastic.

6
Are you serious????

7
Master EverDrive / Re: New Master Everdrive X7 problem
« on: February 04, 2020, 12:44 AM »
Mine is for sure a european model 1 sms modded with etim fm sound mod and 50/60 mod,working fine.

8
Master EverDrive / Re: New Master Everdrive X7 problem
« on: February 01, 2020, 01:51 PM »
My x7 works fine with my sms model 1.

9
Off Topic / Re: GameCube?
« on: January 30, 2020, 08:45 PM »
Gcloader is absolute fantastic,i ordered 1 in the 2nd batch and fitted it without a problem.

10
EverDrive N8 / Re: N8 Pro cartridge shell thickness
« on: January 01, 2020, 11:24 PM »
I have noticed that the N8 Pro cartridge, when inserted in the AV Famicom cartridge slot, can wobble quite a bit, unlike the original N8.  It appears the N8 Pro cartridge shell is thinner than the original by about 1mm.  See the attached pictures.  I was able to make the game reset by just moving the N8 Pro cartridge around.

Krikzz, would you consider increase the thickness of the N8 Pro Shell by a 1-1.5mm?  It would be a lot more stable, given the increased height of the N8 Pro.  As it stands right now there quite a bit of play in between the cartridge slot walls and the cartridge itself.

Why you want to wobble a cartrigde that is in the slot is for me a mystery,if it works,why wobble the cartrigde,explain that please,its like my neosd pro has loaded a rom,and ok,i going to test if its reset if i wobble the cartridge where those are not for made at first.
Those are made for insert them and play  the game,and thats it.

11
EverDrive N8 / N8 v1.20 official is out
« on: January 01, 2020, 09:34 PM »
Hi,

v1.20 is released with new mappers and fixes.

nesos-v1.20 23.12.2019
1) OS naming convention was changed to make clear differentiation between PRO and OG N8 OS. OG N8 OS is 1.xx and PRO is 2.xx
2) Now save states supported by all mappers.
3) New fully functional MMC5 mapper
4) New FDS audio core
5) Audio core for Sunsof5 mapper by Necronomfive
6) Audio core for VRC7 mapper by Necronomfive
7) Specific games databese update. Now works few more games which require specific settings
8) Minor update from MMC3
9) New mappers support(1):  27, 30, 50, 106, 108, 142, 144, 145, 149, 156, 165, 171, 175, 176, 183, 213, 216,
9) New mappers support(2):  222, 252, 37, 45, 49, 51, 52, 105, 177, 190, 197, 207, 214, 228, 229, 244, 249, 250,
9) New mappers support(3):  35, 44, 56, 60, 103, 117, 132, 136, 143, 159, 172, 173, 183, 186, 187, 198, 199, 221, 238, 248
10) FDS autoswap blocking function. Hold A to prevent disk swap. This is mostly for test fds sound in zelda intro.
11) Fixed irq counter in Acclaim mmc3 mapper
12) Audio balance option for mappers with expansion audio
13) Some mappers and fixes were back ported from N8-PRO

12
Master EverDrive / Re: New X7 OS v1.03
« on: December 19, 2019, 10:33 PM »
Tested with my x7,not working.

13
EverDrive 64 / Re: Need original ED64 v1.01 files for SD card
« on: November 14, 2019, 12:00 PM »
http://krikzz.com/pub/support/everdrive-64/v2x-v3x/os-bin/

I think it is v1.29,try it and report here back if that worked.

14
News / Os 3.09 mega everdrive x7
« on: November 01, 2019, 01:11 PM »
New 3.09 os for mega everdrive x7:eeprom fix for megaman(u)

15
Off Topic / Re: 3DO Russian usb ode questions.
« on: September 14, 2019, 06:33 PM »
This i gona install to the fz-10.
Then once the fz-1 rgb board is available,order and install that and probably gona order a usb for the fz-1.
Got a problem with the tray with fz-1,but new belt fixed the problem.
Fz-10 is recapped and rgb modded,so just have to install the usb board.
Gona recap my fz-1 if necessary,then rgb mod it and install the usb board.
But got so many new things(jag sd-tf330-mega sd-controllers retro bit for megadrive-saturn-n64-xbox 360 slim rgh).
So i have to take a break now.

Pages: [1] 2 3 ... 24