Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - ka55

Pages: 1 2 [3]
Tried the decompressed ROM (removed the sfrom header first) on my SD2SNES and I just got a black screen.
O mesmo aqui.

the same here.

Is it possible that this is adapted to work in SD2SNes?
both are running a snes emulator
any emulator can do
can not be apply
to sd2snes

O emulador do snes mini não suporta sdd1, por isso descomprimiram a rom, para poder rodar no snes mini.
Eu levantei está questão, pois talvez fosse possível adaptar a rom descomprimida para o snes mini para ser utilizada no sd2snes.

The snes mini emulator does not support sdd1, so they have decompressed the rom so that it can run on snes mini.
I raised this question because it might be possible to adapt the decompressed rom to the snes mini to be used in sd2snes.

Existe a possibilidade de isso ser adaptado para funcionar no sd2snes ?

Is there a possibility that this is adapted to work in the Sd2snes?

Is it possible that this is adapted to work in SD2SNes?

EverDrive 64 / Re: Suddenly blank screen
« on: September 07, 2017, 06:11 PM »
Why did you put these links ** ?
Nobody could answer, just because of that link.

Para que tu colocaste esses links ** ?
Ninguém deria resposder, só por causa desse link.

EverDrive 64 / Re: Super Mario 64 PT BR
« on: August 30, 2017, 07:59 PM »
Texto original in portuguese.

Ele corrige a rom para rodar no everdrive.
Para usar ele basta pegar a rom que está com o patch aplicado e arrastar para o ed64.exe, que ele irá gerar uma nova rom corrigida.

I'm not speak english, and I used google translator.

He corrects the rom to run on everdrive.
To use it just grab the rom that has the patch applied and drag it to ed64.exe, which will generate a new corrected rom.

EverDrive 64 / Re: Super Mario 64 PT BR
« on: August 30, 2017, 06:46 AM »
Baixa o patch da tradução ou a rom em português, aplica a tradução na rom e depois passa este programa ED64.exe, que o mario 64 em português irá funcionar normalmente, ao menos aqui no meu everdrive 64 v2.0, funcionou normalmente após eu passa este programa na rom.

Link do ed64

Download the translation patch or the portuguese rom, apply the translation in the rom and then pass this program ED64.exe, that the mario 64 in Portuguese will work normally, at least here in my everdrive 64 v2.0, it worked normally after me Passes this program to rom.

Ed64 link

Thanks ikari_01 and One Travel Bag.
The problem was the led it, I changed the LED, and now is functioning normally.

Text in portuguese.

Obrigado ikari_01 e OneBagTravel.
O problema era o led mesmo, eu troquei o led e agora está funcionando normalmente.

Otherwise it works normally? Looks like a bad solder connection on the LED circuit, or the LED itself is damaged.
the led green came back to bind, without I to have done nothing.

Google translator
The green LED returned to work, without me having done anything.
It could be some bad contact, because of some welding?

Text in portuguese.

O led verde voltou a funcionar, sem eu ter feito nada.
Poderia ser algum mau contato, por causa de alguma solda?

The green LED does not light anymore.

O led verde não acende mais.

===log opened===
SD test... please insert card
crc1 = d805a1bf crc2 = d805a1bf   PASSED

RTC Test
setting clock to 2011-01-01 00:00:00
2011-01-01 00:00:00
waiting 5 seconds
new time: 2011-01-01 00:00:05

CIC Test:
Current CIC state: CIC_OK
CIC reports OK; no pair mode available. Provoking CIC error...
new CIC state: CIC_FAIL
***Please reset SNES***

FPGA test
configuring fpga...
fpga_pgm: 212501 bytes programmed
FPGA configured
basic communication test...PASSED

RAM test
Testing RAM0 (128Mbit) - clearing RAM - writing RAM - verifying RAM -RAM0 PASSED

Testing RAM1 (4Mbit) - writing RAM - verifying RAM...RAM1 PASSED

SD DMA test
clearing RAM - loading test file - verifying -PASSED

Loading SNES test ROM

sysclk test
measuring SNES clock...
21454425 Hz
21454425 Hz diff = 0  max = 0
21454425 Hz diff = 0  max = 0
21454426 Hz diff = 1  max = 1
   CPUCLK: 3416645
  READCLK: 3091250
 WRITECLK: 162697
  PARDCLK: 162697
  PAWRCLK: 162697
  REFRCLK: 78645


flash check: 1111-33b04504-37f7a8bb-00-0
Test      Result
SD        Passed
USB       not implemented
RTC       Passed
CIC       Passed
FPGA      Passed
RAM       Passed
SD DMA    Passed
CLK       Passed
DAC       not implemented
SNES IRQ  Passed
SNES RAM  Passed
SNES PA   Passed

After some time on the green LED sd2snes blinking, and after some time the LED is off.
This is normal ?
I bought the SD2SNES less than one month in retrogate, my sd2snes is rev F, and FW 0.1.7D.
FW diagnosis is all ok.
Video showing the LED flashing.

Sorry my English because I speak only Portuguese.

Text in portuguese.
Depois de algumas hora ligado, o led verde do sd2snes fica piscando, e depois ele fica desligado, e as vezes volta a piscar.
Isso é normal ?
Eu comprei o SD2SNES há menos de 1 mês na retrogate, o meu sd2snes é rev F, e o FW 0.1.7D.
FW de diagnostico está tudo ok.
Video mostrando o led piscando.

FXPAK (SD2SNES) / Re: Firmware v0.1.7d released
« on: October 05, 2016, 06:53 PM »
SD2SNES is a Rev.H.
SD2SNES is a Rev.H ??? The last rev. is not G?

I bought my sd2snes in retrogate, and came to rev F, instead of the last rev G :'(

Text in portuguese.

Sd2snes rev H? A ultima rev não é a G ?
Eu comprei meu sd2snes na retrogate, e veio a rev F, ao invés da ultima rev G  :'(

Comprei um recente aqui de PC Engine e não fui taxado.
Tentei comprar o no loja do krikzz mas o cartão não passou de jeito nenhum, tive que comprar na retrogate via paypal, ai foi de boa.

Pages: 1 2 [3]