Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - D4v3WTF

Pages: 1 2 [3] 4 5 ... 19
31
EverDrive 64 / Re: Banjo-Tooie crack intro with ED 64 v3.0
« on: September 23, 2017, 07:15 PM »
Hey Saturnu, thank you for your work! I'm using your UltraCICII on my ED64 v2 and it works like it should!

Greetings

32
EverDrive 64 / Re: Goldfinger 64 has been released!!!!
« on: September 23, 2017, 07:04 PM »
Hello, i have Color issues with my PAL N64 and Everdrive64 v2 . Is it possible to make a PAL Version or to convert the rom? Paladin didn't work.

It does sound like the problem is with your TV, as some PAL TVs can't display the N64's NTSC (or PAL 60, whatever it is) output properly. Try other NTSC roms, such as Sin and Punishment, Harvest Moon 64, and the NTSC versions of other roms, and if it turns out that your TV can display PAL games fine, but not NTSC then you *might* be able to fix this with a different connection from your PAL N64 to your PAL TV, I don't know (i.e. try SCART, or Red/White/Yelllow leads, etc). If not, then unless you get a PAL version of Goldfinger 64 then you're probably stuck with the problem until you buy a new TV.

It is ridiculous that no PAL TV (that I've seen) mentions whether or not it's compatible with NTSC/PAL 60. The next time I buy a TV, I'm going to have to take my N64 into the shop and see if the TV I'm interested in will play non-PAL N64 games.

Hey Kerr Avon, thank you for your posts! They're always help the people! You're right, it depends on the TV, my last two TVs supporter the PAL60 format! The old one was an Grundig 50vle920bl and the new one is a Toshiba 55l3663da. Both hadn't problems with the PAL60 format. But I have to say that I'm using an RGB modded French N64 console.

Thank you, greetings!

34
Hi, I've done the mod by myself. I've made it like ikari showed, but there is a easier way with an pcb from borti. You should check out the German forum www.Circuit-Board.de.

With an Everdrive 64 most games (pal, ntsc) can be played without any problems.

35
EverDrive 64 / Re: Please test Densha de Go! 64 if you can
« on: April 06, 2017, 12:49 AM »
I'll test this tomorrow and post my setup! Hope the bug can be fixed!

36
FXPAK (SD2SNES) / Re: SD2SNES Theme/Menu
« on: March 02, 2017, 08:12 PM »
It didn't work on 0.1.7d for me. Well the theme did work, but I can't launch any games. I just get a black screen.

Same for me, sadly  :-\
A few games launch, but about 90% of the time I only get a black screen.

My model is Rev. H

Just create your own with http://www.dotsarecool.com/sd2snesimg/ ! Applause goes to NesterNes for sharing with us and dotsarecool!

37
FXPAK (SD2SNES) / Re: SD2SNES Theme/Menu
« on: February 28, 2017, 10:17 AM »
Can change your menu here. create your own images. I did not create this but an awesome guy name dotsarecool.

http://www.dotsarecool.com/sd2snesimg/

pics of some of the Menus. Mine is the Peach one.

http://imgur.com/a/zbaKG

Really cool! Thanks for sharing this with us!

39
FXPAK (SD2SNES) / Re: SD2SNES Theme/Menu
« on: February 27, 2017, 09:18 PM »
Hi, I've tried it on an Rev. H model.

40
FXPAK (SD2SNES) / Re: SD2SNES Theme/Menu
« on: February 26, 2017, 09:46 PM »
Thanks for the different skins!
I did some digging and found a post that linked to an updated version of one alternative skin:

https://forum.snesfreaks.com/viewtopic.php?f=160&t=12088&start=45

Link to the menu.bin file:
http://manuloewe.de/snestuff/sd2snes/menu_0.1.7b_ramsis.bin

Example


Sadly it doesn't work on 1.7d

41
EverDrive 64 / Re: Patches for Conker's Bad Fur Day
« on: February 19, 2017, 08:04 PM »
Hey, i like the ideas you have! I've played Conker with my brother on the n64. Have you looked at the ECTS Version? Maybe you can make a ultimate uncut version with the uncut ECTS Version!

Greetings

That would be neat! Not sure how to insert scenes though. ConkerGuru would have to help me with that one

I hope you find some help! Would love to see "Conker's Bad Fur Day - Uncut & Reloaded"  ;D

42
FXPAK (SD2SNES) / Re: Firmware v0.1.7d released
« on: February 19, 2017, 07:59 PM »
sd2snes pfffffff......
Seriously what is your problem ::) First, some years ago you spam the blog with 100x the same comment over and over, then you call me an asshole, now you need to vent here again ???

Looking through Bidou67's post history is laughable, seems to be bipolar or something.  Found this from a previous post lol

SD2SNES is the best realy !! I have SD2SNES REV F and work perfetc

He always cry on Krikzz's and ikari's Flashcards...

43
Shop and Shipping / Re: Destination Germany
« on: February 19, 2017, 07:55 PM »
I had no problems with posting to Germany. I've bought an SD2SNES two years ago.

44
EverDrive 64 / Re: EverDrive 64 v2.0 Questions
« on: February 09, 2017, 11:06 PM »
Hi and welcome!

With an Special CIC (UltraCIC II) you don't need any patches on regular N64 games. The only thing is that you have to program and solder the new CIC by yourself or find someone who can do the job.

Greetings

45
EverDrive 64 / Re: Patches for Conker's Bad Fur Day
« on: February 09, 2017, 11:01 PM »
Hey, i like the ideas you have! I've played Conker with my brother on the n64. Have you looked at the ECTS Version? Maybe you can make a ultimate uncut version with the uncut ECTS Version!

Greetings

Pages: 1 2 [3] 4 5 ... 19