Author Topic: Golden axe 2 and 6 Echo control ??  (Read 4230 times)

0 Members and 1 Guest are viewing this topic.

Offline antonioks

  • Newbie
  • *
  • Posts: 40
  • Karma: +1/-0
    • View Profile
Golden axe 2 and 6 Echo control ??
« on: September 04, 2014, 01:55 AM »
Golden Axe 2 and 6 control buttons can not do the directional mode of the mode button already tried different roms, solar Pier to always first on the screen warning of harvest and finally went to try golden ax 3 Japanese and gave incompatibility screen region .


my mega drive is a Tec Toy mega drive 2 great model that came with sonic 1.
Everdrives I own: Mega Everdrive v1, SD2SNES rev. (E1b), Everdrive N64 v2.5

Offline J-E

  • Jr. Member
  • **
  • Posts: 88
  • Karma: +1/-0
    • View Profile
Re: Golden axe 2 and 6 Echo control ??
« Reply #1 on: September 04, 2014, 09:45 AM »
I'm not sure to understand what is your problem....
but be aware that Golden Axe 2 (at lease in the western version EU and US) is not compatible with a 6 buttons joypad.
Does it answer your question?

Offline Assman

  • Full Member
  • ***
  • Posts: 193
  • Karma: +17/-0
    • View Profile
Re: Golden axe 2 and 6 Echo control ??
« Reply #2 on: September 04, 2014, 08:08 PM »
Holding mode down while turning on the console or plugging in the controller will disable the X, Y, and Z buttons for games like Golden Axe 2. Using the Mega ED makes that a bit trickier, though, as I recall; in that case, I think you need to hold mode as you turn on the console and keep holding it as you load the ROM (or, load the ROM, unplug the controller and hold mode as you plug it back in).

Pier Solar isn't supported by the Mega ED, so whatever ROM you've found out there isn't going to work. For Golden Axe 3, you'll have to patch the region code somehow if MegaKey won't get it to run (you can probably search for either a hacked ROM or Game Genie code).

Offline ZeroWing

  • Pump up the Jams
  • Jr. Member
  • **
  • Posts: 91
  • Karma: +7/-0
    • View Profile
Re: Golden axe 2 and 6 Echo control ??
« Reply #3 on: September 04, 2014, 08:22 PM »
You can load Golden Axe 3 with Mega Everdrive by following these steps.

1.Choose Golden Axe 3 rom with select only.
2.manually set game region from options menu to Jap NTSC.
3.Exit options menu and press start on your controller.
Mega Everdrive v1> EDN8 fami> ED64 v3> sd2snes > Flash2Advance

Offline antonioks

  • Newbie
  • *
  • Posts: 40
  • Karma: +1/-0
    • View Profile
Re: Golden axe 2 and 6 Echo control ??
« Reply #4 on: September 05, 2014, 07:27 AM »
Thanks for the answers. :)
Everdrives I own: Mega Everdrive v1, SD2SNES rev. (E1b), Everdrive N64 v2.5