Author Topic: SD2SNES + Super Nt boot problems with controller connected  (Read 5125 times)

0 Members and 1 Guest are viewing this topic.

Offline protheanbeacon

  • Full Member
  • ***
  • Posts: 134
  • Karma: +6/-0
    • View Profile
Re: SD2SNES + Super Nt boot problems with controller connected
« Reply #15 on: February 20, 2019, 12:32 AM »
The plot thickens...

Man, I'm going to be pretty bummed if low amperage is not the issue.
I wouldn't even know how to troubleshoot this beyond that.
It's clearly something that could affect others, seeing as I'm not the only one who's had this exact issue.

If worse comes to worse you could always contact Analog and ask for a board or console exchange depending on what you're most comfortable with doing.

I watched a youtuber's channel where his problem was he either got a Super NT that didn't work out of the box or it stopped powering on after about a day of play, I forget which.

Anyway he contacted Analog and I believe if memory serves correct they had him send in his defective board and then sent him a new board which he quickly swapped out since apparently doing so is easy once you get the rubber mat pulled off the bottom of the console and just unscrew a few areas.

And voila things worked perfectly for him after that.

Also if for some reason Analog didn't send you a USB to wall plug converter thingamabob I highly recommend these two products from amazon below. I'd of linked em for ya, but I don't think the links were going to work, so you can just search for these exact terms on amazon if you're interested.

AmazonBasics USB 2.0 A-Male to Micro B Cable, 10 feet, Black

AmazonBasics One-Port USB Wall Charger (2.4 Amp) - Black (2-Pack)
« Last Edit: February 20, 2019, 12:39 AM by protheanbeacon »
krikzz products I own: SD2SNES, Joyzz, Everdrive GB X7, Everdrive GBA X5, Mega Everdrive X7, Everdrive 64 v3, Everdrive N8, Turbo Everdrive v2, Master Everdrive X7.

Offline nastc1

  • Jr. Member
  • **
  • Posts: 70
  • Karma: +0/-0
    • View Profile
Re: SD2SNES + Super Nt boot problems with controller connected
« Reply #16 on: February 20, 2019, 01:41 AM »
Mine came with a power brick. If they recommend 2A I would figure that it is a 2A power brick. But I have no idea.

I was fairly sure mine came with a brick as well. I wonder if he bought it used and the seller didn't include it/forget to include it.

Offline ifightdragons

  • Newbie
  • *
  • Posts: 21
  • Karma: +0/-0
    • View Profile
Re: SD2SNES + Super Nt boot problems with controller connected
« Reply #17 on: February 20, 2019, 03:23 AM »
I'm in Europe so I'd need a EU power adapter. My Analogue just came with an American adapter, so therefore I got some EU adapters on eBay, albeit only 1a.
So I'll need to upgrade to 2a now and see how it works. I'll be sure to report back here when done and tell you whether it solved the problem or not.

Thanks for the replies everyone, very helpful.

Offline FeverDrive

  • Hero Member
  • *****
  • Posts: 1299
  • Karma: +54/-0
  • Blast Processing advocate
    • View Profile
Re: SD2SNES + Super Nt boot problems with controller connected
« Reply #18 on: February 23, 2019, 06:59 AM »
Do you have another original controller to test?
WELCO
METOT
HENEX
TLEVEL

Offline BambooShadow

  • Newbie
  • *
  • Posts: 21
  • Karma: +0/-0
    • View Profile
    • BambooShadow @ twitch.tv
Re: SD2SNES + Super Nt boot problems with controller connected
« Reply #19 on: March 01, 2019, 01:48 PM »
IF they recommend a 2A power supply why don't they include one?

they do, but it's US/Jap Plug Type

Offline ifightdragons

  • Newbie
  • *
  • Posts: 21
  • Karma: +0/-0
    • View Profile
Re: SD2SNES + Super Nt boot problems with controller connected
« Reply #20 on: March 08, 2019, 05:53 PM »
Happy update:

Purchased a 5v / 2a USB travel charger on eBay from China, and now everything is working smooth as butter!