Firmware v1.10.0 + 1.10.1 are out.

[James-F]

https://sd2snes.de/blog/downloads

v1.10.0
=======
 * add S-DD1 support by magno
 * initial firmware release for sd2snes Mk.III ("sd2snes pro")
 * fixes:
   - fix memory corruption on BS-X loading
   - reset S-RTC read state on all load and reset occasions

v1.10.1
=======
 * fix bug preventing boot on sd2snes Mk.III...

[fox1918]

firmware 1.10.0 with S-DD1 support sd2snes ?

[fille1976]

The wait is begun for my sd2snes pro,its shipped a few days ago,hope it arrives next week.
In a year time we get all major chip games on our sd2snes,what a year it was.
Now we have the final of sdd1,thx for all guys that contribute to make this happen.
And yes fox,this firmware works also on sd2snes.

[dreimer]

Last one missing and POSSIBLE to make is: SPC7110 aka the one and only chip from Tengai Makyō Zero
But even now it's a monster of a flash cart!

[archimage]

Hello, the firmware 1.10 is out and Dragon Ball Z Hyper Dimension is still broken for my Revision F device how is this possible ? I have found a 1.09 firmware with SDD1 that works for me and still not this official one.

[the_randomizer]

firmware 1.10.0 with S-DD1 support sd2snes ?

It literally says it in the OP, so yes.

[Eyedunno]

firmware 1.10.0 with S-DD1 support sd2snes ?

It literally says it in the OP, so yes.

All I see in the OP is "initial firmware release for sd2snes Mk.III ("sd2snes pro")", so I wouldn't blame anybody for wondering if it will work with Mk.II too.

[fille1976]

I just tested bsx,still 09 error here.
Its a pal snes chip 1 with super cic and igr.
Tested the unpatched versions of darius and actraiser.

[Galron]

So are they making the firmware compatible with both SD2SNES and the Pro? So that included package detects what you have?

[FeverDrive]

So are they making the firmware compatible with both SD2SNES and the Pro? So that included package detects what you have?

Yes.

Support for sd2snes Mk.III (a.k.a. SD2SNES Pro). This works by adding a new set of support files for the new hardware so the firmware package actually contains two firmwares. This also makes it possible to swap the same card between old and new sd2sneses freely.

[Galron]

So are they making the firmware compatible with both SD2SNES and the Pro? So that included package detects what you have?

Yes.

Support for sd2snes Mk.III (a.k.a. SD2SNES Pro). This works by adding a new set of support files for the new hardware so the firmware package actually contains two firmwares. This also makes it possible to swap the same card between old and new sd2sneses freely.

That's a great way to do it, makes it less confusing.

[Relikk]

So are they making the firmware compatible with both SD2SNES and the Pro? So that included package detects what you have?

I presume the .bi3 and the .im3 files are for the Pro.

[the_randomizer]

bsx error on  firmware 1.10.0

Super NT or Snes?  Specify.

[Sceptre_JLRB]

Thank you very much and congratulations for such an excellent work to Ikari, magno, RedGuy & everyone involved!

However, I’ve to report that BS-X compatibility is still not working to me. Whenever I try to run a SatellaView ROM from the BS-X interface, the game won’t never load and the Error 09 pops up.

Setting: SD2SNES Rev.F and Super Famicom.

[josete2k]

10.0.1 is out!!!

https://sd2snes.de/blog/downloads


Only related to PRO users...